Celestion Sub Bass Speakers
Celestion sub bass speakers employ cutting edge technology and tight manufacturing tolerances to ensure superb performance and consistency. Models are available to suit ported enclosures, bandpass systems and horn loaded designs. Celestion subs provide the foundation for anything from rock to rap, live bands to clubs, cinema to mobile DJ or anything in between.
Huge magnet and motor assembly provides 3,2KW power handling and high sensitivity
Out of Stock
R18,875.00
2,000 W of tight 15" bass kick from a horn loaded or compact ported enclosure
Out of Stock
R9,450.00
2,000 W of tight 15" bass kick from a horn loaded or compact ported enclosure
Out of Stock
R9,450.00
Dual suspension speaker with deep powerful bass response in large enclosures
Out of Stock
R12,300.00
High power cast chassis sub bass driver with weatherproof cone for 120-150l enclosures
Out of Stock
R11,825.00
High power cast chassis Neodymium sub bass driver with weatherproof cone
Out of Stock
R21,000.00
Celestion CF1840JD 18" 4 Ohm Sub Bass (CF1840JD 4 Ohm)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1840JD is typical of the series and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,200W AES, 2,400W continuous. 4,800W peak |
| Nominal Impedance | 4 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 37 Hz |
| Xmax | 12.5 mm |
| Qts | 0.397 |
| Vas | 155 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 112 Oz, 3.18 Kg |
| Total Weight | 25.5 lb, 11.6 Kg |
| Suggested enclosure | 150-180l ported at 40 Hz |
More Info
2,400 W speaker with response down to 35Hz in a large ported enclosure
Out of Stock
R11,500.00
Celestion CF1840JD 18" 8 Ohm Sub Bass (CF1840JD 8 Ohm)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1840JD is typical of the series and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,200W AES, 2,400W continuous. 4,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 37 Hz |
| Xmax | 12.5 mm |
| Qts | 0.397 |
| Vas | 155 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 112 Oz, 3.18 Kg |
| Total Weight | 25.5 lb, 11.6 Kg |
| Suggested enclosure | 150-180l ported at 40 Hz |
More Info
2,400 W speaker with response down to 35Hz in a large ported enclosure
Out of Stock
R11,500.00
Celestion CF18VJD 18" Sub Bass (CF18VJD)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF18VJD offers high efficiency with huge extended, tight and powerful bass response and massive power handling. It offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 5" dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
The CF18VJD offers high efficiency with huge extended, tight and powerful bass response and massive power handling. It offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 5" dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,600W AES, 3,200W continuous. 6,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 25-1,500 Hz |
| Resonance Frequency | 34.5 Hz |
| Xmax | 12 mm |
| Qts | 0,309 |
| Vas | 145.8 l |
| Voice Coil Diameter | 5", 125 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Carbon and Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 174 Oz, 4.93 Kg |
| Total Weight | 50.6 lb, 23 Kg |
| Suggested enclosure | Horn loaded or 80-100l ported at 40Hz. |
More Info
Huge magnet and motor assembly provides 3,2KW power handling and high sensitivity
Out of Stock
R18,875.00
Celestion FTR12-4080DL 12" 8 Ohm Sub Bass (FTR12-4080DL 8 Ohm)
The Celestion FTR12-4080DL is a 12 inch high quality sub bass woofer ideally suited to compact ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with elastomer surround for maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
A high temperature round copper voice coil with aluminium former for increased (1KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with elastomer surround for maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
A high temperature round copper voice coil with aluminium former for increased (1KW EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 700W AES, 1,400W continuous. 2,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 88 dB 1W 1M |
| Frequency Range | 20-300 Hz |
| Resonance Frequency | 28.9 Hz |
| Xmax | 13.6 mm |
| Qts | 0.303 |
| VAS | 68.6 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Round copper |
| Former Material | Aluminium |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 126 Oz, 3.6 Kg |
| Total Weight | 22.4 lb, 10.2 Kg |
| Suggested enclosure | 50-70l ported at 30 Hz |
More Info
12 inch long excursion dual suspension sub with extension down to 25Hz
Out of Stock
R10,000.00
Celestion FTR15-4080HDX 15" 4 Ohm Sub Bass (FTR15-4080HDX 4 Ohm)
The Celestion FTR15-4080HDX is a 15 inch high quality sub bass woofer ideally suited to compact ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 4 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-2,500 Hz |
| Resonance Frequency | 40 Hz |
| Xmax | 10.1 mm |
| Qts | 0.320 |
| Vas | 111.2 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.4 lb, 9.7 Kg |
| Suggested enclosure | Horn loaded or 80-100l ported at 45Hz |
More Info
2,000 W of tight 15" bass kick from a horn loaded or compact ported enclosure
Out of Stock
R9,450.00
Celestion FTR15-4080HDX 15" 8 Ohm Sub Bass (FTR15-4080HDX 8 Ohm)
The Celestion FTR15-4080HDX is a 15 inch high quality sub bass woofer ideally suited to compact ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-2,500 Hz |
| Resonance Frequency | 40 Hz |
| Xmax | 10.1 mm |
| Qts | 0.320 |
| VAS | 111.2 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.4 lb, 9.7 Kg |
| Suggested enclosure | Horn loaded or 80-100l ported at 45Hz |
More Info
2,000 W of tight 15" bass kick from a horn loaded or compact ported enclosure
Out of Stock
R9,450.00
Celestion FTR18-4080HDX 18" Sub Bass (FTR18-4080HDX)
The Celestion FTR18-4080HDX is an 18 inch high quality sub bass woofer ideally suited to large ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 39.2 Hz |
| Xmax | 10.1 mm |
| Qts | 0.429 |
| Vas | 174.88 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.6 lb, 9.8 Kg |
| Suggested enclosure | 200l ported at 45Hz |
More Info
Dual suspension speaker with deep powerful bass response in large enclosures
Out of Stock
R12,300.00
Celestion PowerPro X18 (PowerProX18)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling results in an average 20 degree drop in voice coil temperature.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
A Polysiloxane coated double suspension system with "flexiroll" surround ensures maximum control of the cone over large excursions.
The glass loaded cellulose cone has a weather resistant coating on both the front and rear.
An Aluminium demodulation ring ensures minimum distortion at cone excursion extremes.
A 4 inch high power voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's PowerPro speakers offer cutting edge design and technology to ensure superb performance and reliability in the most demanding applications.
The PowerProX18 is a brand new design suited to mid size reflex enclosures and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling results in an average 20 degree drop in voice coil temperature.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
A Polysiloxane coated double suspension system with "flexiroll" surround ensures maximum control of the cone over large excursions.
The glass loaded cellulose cone has a weather resistant coating on both the front and rear.
An Aluminium demodulation ring ensures minimum distortion at cone excursion extremes.
A 4 inch high power voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,200W AES, 2,400W continuous. 4,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 35-1,000 Hz |
| Resonance Frequency | 35 Hz |
| Xmax | 9.3 mm |
| Xmech | 48mm |
| Qts | 0.379 |
| Vas | 188.9 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass loaded cellulose |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 112 Oz, 3.18 Kg |
| Total Weight | 25.5 lb, 11.6 Kg |
| Suggested enclosure | 120-150l ported at 40Hz |
More Info
High power cast chassis sub bass driver with weatherproof cone for 120-150l enclosures
Out of Stock
R11,825.00
Celestion TSQ1845 (TSQ1845)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Three channel airflow venting to maximise voice coil cooling to control thermal compression and increase power handling resulting in an average 30 degree drop in voice coil temperature.
Special voice coil and lead out wire design for maximum long term reliability.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
A Polysiloxane coated double suspension system with "flexiroll" surround ensures maximum control of the cone over large excursions.
The glass loaded cellulose cone has a weather resistant coating on both the front and rear.
A 4.5 inch high power voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's TSQ speakers are designed, engineered and manufactured in the UK to ensure the best possible performance and reliability in premium quality systems.
The TSQ18 is a brand new design suited to compact reflex or horn loaded enclosures and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Three channel airflow venting to maximise voice coil cooling to control thermal compression and increase power handling resulting in an average 30 degree drop in voice coil temperature.
Special voice coil and lead out wire design for maximum long term reliability.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
A Polysiloxane coated double suspension system with "flexiroll" surround ensures maximum control of the cone over large excursions.
The glass loaded cellulose cone has a weather resistant coating on both the front and rear.
A 4.5 inch high power voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,800W AES, 3,600W continuous. 7,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96.5 dB 1W 1M |
| Frequency Range | 30-1,000 Hz |
| Resonance Frequency | 35 Hz |
| Xmax | 15 mm |
| Xmech | 40mm |
| Qts | 0.290 |
| Vas | 119.3 l |
| Voice Coil Diameter | 4.5", 115 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass loaded cellulose with weather coating |
| Chassis Type | Cast Aluminium |
| Magnet | Neodymium |
| Total Weight | 26 lb, 11.8 Kg |
More Info
High power cast chassis Neodymium sub bass driver with weatherproof cone
Out of Stock
R21,000.00
Celestion TSQ2145 (TSQ2145)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Three channel airflow venting to maximise voice coil cooling to control thermal compression and increase power handling resulting in an average 30 degree drop in voice coil temperature.
Special voice coil and lead out wire design for maximum long term reliability.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
A Polysiloxane coated double suspension system with "flexiroll" surround ensures maximum control of the cone over large excursions.
The glass loaded cellulose cone has a weather resistant coating on both the front and rear.
A 4.5 inch high power voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's TSQ speakers are designed, engineered and manufactured in the UK to ensure the best possible performance and reliability in premium quality systems.
The TSQ21 is a brand new design suited to compact reflex or horn loaded enclosures and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion.
Three channel airflow venting to maximise voice coil cooling to control thermal compression and increase power handling resulting in an average 30 degree drop in voice coil temperature.
Special voice coil and lead out wire design for maximum long term reliability.
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
A Polysiloxane coated double suspension system with "flexiroll" surround ensures maximum control of the cone over large excursions.
The glass loaded cellulose cone has a weather resistant coating on both the front and rear.
A 4.5 inch high power voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 21 inch, 530 mm |
| Power rating | 1,800W AES, 3,600W continuous. 7,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-1,000 Hz |
| Resonance Frequency | 30 Hz |
| Xmax | 15 mm |
| Xmech | 40mm |
| Qts | 0.344 |
| Vas | 253.8 l |
| Voice Coil Diameter | 4.5", 115 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass loaded cellulose with weather coating |
| Chassis Type | Cast Aluminium |
| Magnet | Neodymium |
| Total Weight | 30.4 lb, 13.8 Kg |
More Info
21 inch cast chassis Neodymium sub bass driver with weatherproof cone
Out of Stock
R24,600.00
- 1