Bass
High sensitivity speaker ideally suited to 2 way large format compression driver systems
Offering a frequency range of 30-3,000 Hz this unit is ideal for powerful compact 3 way designs
Celestion FTR15-3070C 15" Bass (FTR15-3070C)
The Celestion FTR15-3070C is a 15 inch high quality, high efficiency bass driver ideally suited to three way systems or particularly to two way large format compression driver designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 41.4 Hz |
| Xmax | 3 mm |
| Qts | 0.382 |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.8 lb, 6.3 Kg |
More Info
High sensitivity speaker ideally suited to 2 way large format compression driver systems
Celestion FTR15-3070E 15" Bass (FTR15-3070E)
The Celestion FTR15-3070E is a 15 inch high quality woofer ideally suited to premium three way system designs or dual 15 designs with a large format compression driver. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General Specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General Specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 45.9 Hz |
| Xmax | 5.5 mm |
| Qts | 0.379 |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 14.1 lb, 6.4 Kg |
More Info
800W woofer suited to dual 15 designs with large format compression drivers
Celestion FTR15-4080F 15" Bass (FTR15-4080F)
The Celestion FTR15-4080F is a 15 inch high quality woofer ideally suited to high power three way system designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
A round copper inside/outside wound voice coil with glass fibre former for increased (800W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
A round copper inside/outside wound voice coil with glass fibre former for increased (800W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 600W AES, 1,200W continuous. 2,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-3,000 Hz |
| Resonance Frequency | 38 Hz |
| Xmax | 6 mm |
| Qts | 0.249 |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 20.7 lb, 9.4 Kg |
More Info
Offering a frequency range of 30-3,000 Hz this unit is ideal for powerful compact 3 way designs
Celestion NTR10-2520E 10" bass (NTR10-2520E)
The Celestion NTR10-2520E is an 10 inch high quality bass driver ideally suited to compact 2 way designs and features the following design highlights:
A lightweight, powerful dual Neodymium magnet assembly.
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with airflow venting and vented heatsink.
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with glass fibre former for increased power handling.
General specifications
A lightweight, powerful dual Neodymium magnet assembly.
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with airflow venting and vented heatsink.
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with glass fibre former for increased power handling.
General specifications
| Nominal Diameter | 10 inch, 254 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-3,000 Hz |
| Resonance Frequency | 55.8 Hz |
| Xmax | 4.75 mm |
| Qts | 0.312 |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Inside outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Neodymium |
| Total Weight | 4.89 lb, 2.2 Kg |
More Info
Premium quality 500 Watt 10 inch woofer with lightweight Neodymium magnet
Celestion NTR15-3018E 15" bass (NTR15-3018E)
The Celestion NTR15-3018E is a 15 inch high quality bass driver ideally suited to light weight 3 way designs or 2 way designs large format compression drivers and features the following design highlights:
A lightweight, powerful Neodymium magnet assembly
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased power handling.
General specifications
A lightweight, powerful Neodymium magnet assembly
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 450W AES, 900W continuous, 1,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 30-3,000 Hz |
| Resonance Frequency | 34.9 Hz |
| Xmax | 5 mm |
| Qts | 0.283 |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Edgewound copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Neodymium |
| Total Weight | 8.87 lb, 4 Kg |
More Info
Lightweight 900 Watt speaker with a frequency range of 30-3,000 Hz
Celestion TF1230 12" bass (TF1230)
The Celestion TF1230 is a 12 inch general purpose bass driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with polyimide former for increased (500W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with polyimide former for increased (500W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 350W AES, 700W continuous, 1,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 94 dB 1W 1M |
| Frequency Range | 45-3,000 Hz |
| Resonance Frequency | 59 Hz |
| Xmax | 5 mm |
| Qts | 0.515 |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 48 Oz, 1.4 Kg |
| Total Weight | 9.46 lb, 4.3 Kg |
More Info
12 inch general purpose woofer ideal for cost effective 2 way systems
Celestion TF1530e 15" bass (TF1530e)
The Celestion TF1530e is a 15 inch general purpose bass driver ideally suited to two or 3 way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 45-3,500 Hz |
| Resonance Frequency | 47.5 Hz |
| Xmax | 3.5 mm |
| Qts | 0.473 |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edgewound copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.4 Kg |
| Total Weight | 10.6 lb, 4.8 Kg |
More Info
Cost effective general purpose bass driver for 2 or 3 way systems
- 1