Celestion Bass Mid Speakers
Celestion CF1025C 10" Bass/Mid (CF1025C)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
Nominal Diameter | 10 inch, 254 mm |
Power rating | 300W AES, 600W continuous, 1,200W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 99 dB 1W 1M |
Frequency Range | 60-5,000 Hz |
Resonance Frequency | 54.8 Hz |
Xmax | 2.5 mm |
Qts | 0.265 |
Vas | 38.63 l |
Voice Coil Diameter | 2.5", 64 mm |
Voice Coil Construction | Edgewound copper clad aluminium |
Former Material | Glass fibre |
Cone Material | Kevlar loaded paper |
Chassis Type | Cast aluminium |
Magnet | Ferrite, 60 Oz, 1.7 Kg |
Total Weight | 10.8 lb, 4.9 Kg |
More Info
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
Celestion FTR08-2011D 8" bass/mid (FTR08-2011D)
The Celestion FTR08-2011D is an 8 inch high quality bass/mid driver ideally suited to premium two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
Nominal Diameter | 8 inch, 200- mm |
Power rating | 200W AES, 400W continuous, 800W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 93 dB 1W 1M |
Frequency Range | 70-6,000 Hz |
Resonance Frequency | 86.1 Hz |
Xmax | 3.5 mm |
Qts | 0.436 |
Vas | 8.99 l |
Voice Coil Diameter | 2", 50 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Weather treated Kevlar loaded paper |
Chassis Type | Cast aluminium |
Magnet | Ferrite, 60 Oz, 1.7 Kg |
Total Weight | 8 lb, 3.65 Kg |
More Info
400 Watt speaker suited to compact 2 way and line array systems
Celestion FTR12-3070C 12" bass/mid (FTR12-3070c)
The Celestion FTR12-3070C is a 12 inch high quality bass/mid driver ideally suited to two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
Nominal Diameter | 12 inch, 305 mm |
Power rating | 350W AES, 700W continuous, 1,400W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 96 dB 1W 1M |
Frequency Range | 40-4,000 Hz |
Resonance Frequency | 65.1 Hz |
Xmax | 3 mm |
Qts | 0.32 |
Vas | 43.7 l |
Voice Coil Diameter | 3", 75 mm |
Voice Coil Construction | Inside/outside wound round copper |
Former Material | Glass fibre |
Cone Material | Weather treated glass fibre loaded paper |
Chassis Type | Cast Aluminium |
Magnet | Ferrite, 81 Oz, 2.3 Kg |
Total Weight | 13.9 lb, 6.3 Kg |
More Info
The classic premium grade 2 way 12 inch speaker, 700 Watts, 96dB, 40-4,000Hz
Celestion TF0510 5" bass/mid (TF0510)
The Celestion TF0510 is a 5 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (50W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (50W EIA) power handling.
General specifications
Nominal Diameter | 5 inch, 127 mm |
Power rating | 30W AES, 60W continuous, 120W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 91 dB 1W 1M |
Frequency Range | 130-8,000 Hz |
Resonance Frequency | 128.1 Hz |
Xmax | 1.1 mm |
Qts | 0.658 |
Vas | 7.38 l |
Voice Coil Diameter | 1", 25 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 13 Oz, 0.37 Kg |
Total Weight | 2.2 lb, 1 Kg |
More Info
Perfect choice for desktop monitors or high quality background music systems
Celestion TF0615 6" bass/mid (TF0615)
The Celestion TF0615 is a 6 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
Nominal Diameter | 6 inch, 152 mm |
Power rating | 100W AES, 200W continuous, 400W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 94 dB 1W 1M |
Frequency Range | 85-6,000 Hz |
Resonance Frequency | 104.7 Hz |
Xmax | 2.5 mm |
Qts | 0.608 |
Vas | 6.411 l |
Voice Coil Diameter | 1.5", 38 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 17 Oz, 0.48 Kg |
Total Weight | 3.1 lb, 1.4 Kg |
More Info
Achieves optimal performance in compact 2 way enclosures with a crossover around 5KHz
Celestion TF0818 8" bass/mid (TF0818)
The Celestion TF0818 is an 8 inch general purpose bass/mid driver ideally suited to compact two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
Nominal Diameter | 8 inch, 203 mm |
Power rating | 100W AES, 200W continuous, 400W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 94 dB 1W 1M |
Frequency Range | 70-6,000 Hz |
Resonance Frequency | 100 Hz |
Xmax | 3.5 mm |
Qts | 0.429 |
Vas | 9.44 l |
Voice Coil Diameter | 1.75", 45 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 31 Oz, 0.88 Kg |
Total Weight | 5.1 lb, 2.3 Kg |
More Info
Classic 8 inch 2 way design loudspeaker with extended frequency range
Celestion TF1020 10" bass/mid (TF1020)
The Celestion TF1020 is a 10 inch general purpose bass/mid driver ideally suited to two way system designs and bandpass bass cabinets and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (250W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (250W EIA) power handling.
General specifications
Nominal Diameter | 10 inch, 254 mm |
Power rating | 150W AES, 300W continuous, 600W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 97 dB 1W 1M |
Frequency Range | 60-3,000 Hz |
Resonance Frequency | 69.4 Hz |
Xmax | 2 mm |
Qts | 0.323 |
Vas | 28.75 l |
Voice Coil Diameter | 2", 50 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 42 Oz, 1.2 Kg |
Total Weight | 8.2 lb, 3.7 Kg |
More Info
High sensitivity with extended bass response and 300 watt power handling
Celestion TF1225 12" bass/mid (TF1225)
The Celestion TF1225 is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
Nominal Diameter | 12 inch, 305 mm |
Power rating | 250W AES, 500W continuous, 1,000W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 97 dB 1W 1M |
Frequency Range | 50-4,000 Hz |
Resonance Frequency | 55.6 Hz |
Xmax | 2.5 mm |
Qts | 0.37 |
Vas | 67.27 l |
Voice Coil Diameter | 2.5", 64 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 42 Oz, 1.2 Kg |
Total Weight | 9 lb, 4.1 Kg |
More Info
Celestion's bestselling 12 inch speaker, 500 Watts of cost effective performance
Celestion TF1225e 12" bass/mid (TF1225e)
The Celestion TF1225e is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
Nominal Diameter | 12 inch, 305 mm |
Power rating | 300W AES, 600W continuous, 1,200W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 96 dB 1W 1M |
Frequency Range | 50-3,000 Hz |
Resonance Frequency | 52.6 Hz |
Xmax | 3.5 mm |
Qts | 0.333 |
Vas | 67.71 l |
Voice Coil Diameter | 2.5", 64 mm |
Voice Coil Construction | Edge wound copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 50 Oz, 1.4 Kg |
Total Weight | 9.7 lb, 4.4 Kg |
More Info
Tight controlled bass response and an edge wound voice coil
Celestion TF1525 15" bass/mid (TF1525)
The Celestion TF1525 is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
Nominal Diameter | 15 inch, 381 mm |
Power rating | 250W AES, 500W continuous, 1,000W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 98 dB 1W 1M |
Frequency Range | 40-3,000 Hz |
Resonance Frequency | 47.6 Hz |
Xmax | 2.5 mm |
Qts | 0.493 |
Vas | 148.41 l |
Voice Coil Diameter | 2.5", 64 mm |
Voice Coil Construction | Round copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 42 Oz, 1.2 Kg |
Total Weight | 11.5 lb, 5.2 Kg |
More Info
Ideal as a general purpose replacement unit or in your own enclosure design
Celestion TF1525e 15" bass/mid (TF1525e)
The Celestion TF1525e is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (450W EIA) power handling.
General specifications
Nominal Diameter | 15 inch, 381 mm |
Power rating | 300W AES, 600W continuous, 1,200W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 97 dB 1W 1M |
Frequency Range | 45-3,500 Hz |
Resonance Frequency | 47.5 Hz |
Xmax | 3.5 mm |
Qts | 0.473 |
Vas | 141.77 l |
Voice Coil Diameter | 2.5", 64 mm |
Voice Coil Construction | Edge wound copper |
Former Material | Glass fibre |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 50 Oz, 1.4 Kg |
Total Weight | 10.6 lb, 4.8 Kg |
More Info
Powerful bass response with extended upper range and 600 Watt power handling
Celestion TN1230 12" bass/mid (TN1230)
The Celestion TN1230 is a 12 inch lightweight general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented neodymium magnet assembly with heatsink for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented neodymium magnet assembly with heatsink for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
Nominal Diameter | 12 inch, 305 mm |
Power rating | 300W AES, 600W continuous, 1,200W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 97 dB 1W 1M |
Frequency Range | 50-4,000 Hz |
Resonance Frequency | 54.8 Hz |
Xmax | 3.75 mm |
Qts | 0.28 |
Vas | 59.86 l |
Voice Coil Diameter | 3", 75 mm |
Voice Coil Construction | Round wound copper |
Former Material | Polyimide |
Cone Material | Kevlar loaded paper |
Chassis Type | Pressed steel |
Magnet | Neodymium |
Total Weight | 4.4 lb, 2 Kg |
More Info
Controlled bass, extended mids and a lightweight Neodymium magnet
- 1