Celestion Full Range Speakers
Celestion offer full range co-axial systems requiring a crossover for compact system design with excellent time alignment as well as wide range single driver units for column arrays and full size applications.
20W RMS 2.75" full range speaker with Neodymium magnet and Aluminium cone
Out of Stock
R1,575.00
6.5" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R5,075.00
8" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R5,975.00
10" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R8,075.00
12" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R9,775.00
15" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R14,250.00
Celestion AN2075 full range (AN 2075)
The AN2075 is a compact full range loudspeaker ideally suited to use in column line array systems or compact monitors. They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone with dual cone assembly and half roll elastomer surround.
General specifications
General specifications
| Nominal Diameter | 2 inch, 50 mm |
| Power rating | 20W RMS, 40W continuous |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 82 dB 1W 1M |
| Frequency Range | 160-19,000 Hz |
| Resonance Frequency | 153.4 Hz |
| Xmax | 1.5 mm |
| Qts | 0.839 |
| Voice Coil Diameter | 0.75", 20 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Aluminium with elastomer surround |
| Chassis Type | ABS |
| Magnet | Neodymium |
| Total Weight | 3.4 Oz, 0.097 Kg |
More Info
20W RMS 2" full range speaker with Neodymium magnet and Aluminium cone
Out of Stock
R1,425.00
Celestion AN2775 full range (AN 2775)
The AN2775 is a compact full range loudspeaker ideally suited to use in column line array systems or compact monitors. They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone with dual cone assembly and half roll elastomer surround.
General specifications
General specifications
| Nominal Diameter | 2.75 inch, 70 mm |
| Power rating | 20W RMS, 40W continuous |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 84 dB 1W 1M |
| Frequency Range | 160-20,000 Hz |
| Resonance Frequency | 123.3 Hz |
| Xmax | 1.5 mm |
| Qts | 0.959 |
| Voice Coil Diameter | 0.75", 20 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Aluminium with elastomer surround |
| Chassis Type | ABS |
| Magnet | Neodymium |
| Total Weight | 3.53 Oz, 0.10 Kg |
More Info
20W RMS 2.75" full range speaker with Neodymium magnet and Aluminium cone
Out of Stock
R1,575.00
Celestion AN3510 full range (AN 3510)
The AN3510 is a compact full range loudspeaker ideally suited for use in column line array systems or compact monitors. They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone with dual cone assembly and half roll elastomer surround.
General specifications
General specifications
| Nominal Diameter | 3.5 inch, 88 mm |
| Power rating | 35W RMS, 70W continuous |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 87 dB 1W 1M |
| Frequency Range | 98-18,500 Hz |
| Resonance Frequency | 113.4 Hz |
| Xmax | 1.25 mm |
| Qts | 0.646 |
| Voice Coil Diameter | 1", 25 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Aluminium with elastomer surround |
| Chassis Type | ABS |
| Magnet | Neodymium |
| Total Weight | 5.65 Oz, 0.16 Kg |
More Info
35W RMS 3.5" full range speaker with Neodymium magnet and Aluminium cone
Celestion FTX0617 Co-axial full range (FTX0617)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0617 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0617 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 6.5 inch, 165 mm | |
| Power rating | 300W continuous | 80W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 92dB 1W 1M | 103dB 1W 1M |
| Frequency Range | 100-6,000 Hz | 1,500-20,000 Hz |
| Resonance Frequency | 100 Hz | |
| Xmax | 2 mm | |
| Qts | 0.738 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 1.75", 44 mm | 1.4", 34 mm |
| Voice Coil Construction | Edgewound copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 0.88Kg | |
| Weight | 3 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED6.5" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R5,075.00
Celestion FTX0820 Co-axial full range (FTX0820)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0820 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0820 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 8 inch, 200 mm | |
| Power rating | 400W continuous | 80W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 94dB 1W 1M | 103dB 1W 1M |
| Frequency Range | 70-5,000 Hz | 1,500-20,000 Hz |
| Resonance Frequency | 78.8 Hz | |
| Xmax | 2 mm | |
| Qts | 0.279 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 2", 50 mm | 1.4", 34 mm |
| Voice Coil Construction | Edgewound copper | Copper clad Aluminium |
| Former Material | Glass fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 1.5 Kg | |
| Weight | 4.1 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED8" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R5,975.00
Celestion FTX1025 Co-axial full range (FTX1025)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1025 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1025 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 10 inch, 254 mm | |
| Power rating | 600W continuous | 80W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 96dB 1W 1M | 104dB 1W 1M |
| Frequency Range | 60-5,000 Hz | 1,000-20,000 Hz |
| Resonance Frequency | 71.5 Hz | |
| Xmax | 3 mm | |
| Qts | 0.44 | |
| Minimum crossover point | 2,000 Hz | |
| Voice Coil Diameter | 2.5", 64 mm | 1.4", 34 mm |
| Voice Coil Construction | Edgewound Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass Fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 1.5 Kg | |
| Weight | 4.5 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED10" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R8,075.00
Celestion FTX1225 Co-axial full range (FTX1225)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1225 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1225 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 12 inch, 305 mm | |
| Power rating | 600W continuous | 120W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 97dB 1W 1M | 104dB 1W 1M |
| Frequency Range | 50-4,000 Hz | 1,000-18,000 Hz |
| Resonance Frequency | 42 Hz | |
| Xmax | 4 mm | |
| Qts | 0.403 | |
| Minimum crossover point | 2,000 Hz | |
| Voice Coil Diameter | 2.5", 64 mm | 1.75", 44 mm |
| Voice Coil Construction | Edgewound Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass Fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 2.3 Kg | |
| Weight | 5.9 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED12" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R9,775.00
Celestion FTX1530 Co-axial full range (FTX1530)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1525 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1525 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 15 inch, 381 mm | 150W continuous |
| Power rating | 800W continuous | 150W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 97dB 1W 1M | 106.5dB 1W 1M |
| Frequency Range | 40-4,000 Hz | 800-18,000 Hz |
| Resonance Frequency | 42.5 Hz | |
| Xmax | 4 mm | |
| Qts | 0.28 | |
| Minimum crossover point | 1,000 Hz | |
| Voice Coil Diameter | 3", 75 mm | 3", 75 mm |
| Voice Coil Construction | Edgewound Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass Fibre | |
| Cone/Diaphragm | Kevlar loaded paper | Titanium + Polyimide surround |
| Magnet | Ferrite, 2.3 Kg | |
| Weight | 6.5 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED15" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R14,250.00
Celestion K12H200TC dual cone (K12H200TC)
The Celestion K12H200TC is a 12 inch dual cone bass/mid driver with extended HF response ideally suited for small PA or stage monitor applications. It can be used alone or with a suitable tweeter or compression driver and horn. It offers the following features:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W EIA, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 50-10,000 Hz |
| Resonance Frequency | 62.3 Hz |
| Xmax | 2 mm |
| Qts | 0,374 |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.41 Kg |
| Total Weight | 8.6 lb, 3.9 Kg |
More Info
12 inch loudspeaker with a "wizzer" cone extending response to above 10Khz
Celestion TFX0515 Co-axial full range (TFX0515)
Celestion's TFX series co-axials offer highly cost effective speakers with wide dispersion and high power handling.
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. The roll surround woofer and longer voice coil allows for extended bass response from a very compact driver. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0515-Crossover
General Specifications
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. The roll surround woofer and longer voice coil allows for extended bass response from a very compact driver. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0515-Crossover
General Specifications
| LF | HF | |
| Nominal Diameter | 5 inch, 125 mm | |
| Power rating | 300W continuous | 20W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 89dB 1W 1M | 96dB 1W 1M |
| Frequency Range | 80-4,000 Hz | 1,400-20,000 Hz |
| Resonance Frequency | 80 Hz | |
| Xmax | 2.25 mm | |
| Qts | 0.627 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 1.5", 38 mm | 1", 25 mm |
| Voice Coil Construction | Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Polyimide | |
| Cone/Diaphragm | Kevlar loaded paper | Silk dome |
| Magnet | Ferrite, 0.65Kg | |
| Weight | 1.6 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED5" high power handling full range speaker with co-axial dome tweeter
Out of Stock
R2,325.00
Celestion TFX0615 Co-axial full range (TFX0615)
Celestion's TFX series co-axials offer highly cost effective speakers with wide dispersion and high power handling.
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0615-Crossover
General Specifications
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0615-Crossover
General Specifications
| LF | HF | |
| Nominal Diameter | 5 inch, 125 mm | |
| Power rating | 300W continuous | 20W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 94dB 1W 1M | 98dB 1W 1M |
| Frequency Range | 100-6,000 Hz | 1,700-20,000 Hz |
| Resonance Frequency | 97 Hz | |
| Xmax | 3.75 mm | |
| Qts | 0.376 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 1.5", 38 mm | 1", 25 mm |
| Voice Coil Construction | Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Polyimide | |
| Cone/Diaphragm | Kevlar loaded paper | Silk dome |
| Magnet | Ferrite, 0.65Kg | |
| Weight | 1.6 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED6.5" high power handling full range speaker with co-axial dome tweeter
Out of Stock
R2,700.00
- 1