Pro Audio Speakers
Celestion are one of the top speaker manufacturers in the world and are renowned for performance, reliability and extremely conservative published specifications. Thanks to their use of cutting edge technology and their consistent manufacturing standards they are an OEM supplier to some of the worlds biggest brands including EAW, Martin, QSC, Yamaha and others.
Replace damaged speakers, upgrade your systems or build your own with Celestion
Kindly contact us on 011 443 6290 or info@profaudio.co.za to confirm availability of out of stock items prior to making payment.
Replace damaged speakers, upgrade your systems or build your own with Celestion
Kindly contact us on 011 443 6290 or info@profaudio.co.za to confirm availability of out of stock items prior to making payment.
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
High sensitivity speaker ideally suited to 2 way large format compression driver systems
Offering a frequency range of 30-3,000 Hz this unit is ideal for powerful compact 3 way designs
Dual suspension speaker with tight controlled bass from reflex, horn or bandpass enclosures
Celestion AN2075 full range (AN 2075)
The AN2075 is a compact full range loudspeaker ideally suited to use in column line array systems or compact monitors. They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone with dual cone assembly and half roll elastomer surround.
General specifications
General specifications
| Nominal Diameter | 2 inch, 50 mm |
| Power rating | 20W RMS, 40W continuous |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 82 dB 1W 1M |
| Frequency Range | 160-19,000 Hz |
| Resonance Frequency | 153.4 Hz |
| Xmax | 1.5 mm |
| Qts | 0.839 |
| Voice Coil Diameter | 0.75", 20 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Aluminium with elastomer surround |
| Chassis Type | ABS |
| Magnet | Neodymium |
| Total Weight | 3.4 Oz, 0.097 Kg |
More Info
20W RMS 2" full range speaker with Neodymium magnet and Aluminium cone
Celestion AN2775 full range (AN 2775)
The AN2775 is a compact full range loudspeaker ideally suited to use in column line array systems or compact monitors. They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone with dual cone assembly and half roll elastomer surround.
General specifications
General specifications
| Nominal Diameter | 2.75 inch, 70 mm |
| Power rating | 20W RMS, 40W continuous |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 84 dB 1W 1M |
| Frequency Range | 160-20,000 Hz |
| Resonance Frequency | 123.3 Hz |
| Xmax | 1.5 mm |
| Qts | 0.959 |
| Voice Coil Diameter | 0.75", 20 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Aluminium with elastomer surround |
| Chassis Type | ABS |
| Magnet | Neodymium |
| Total Weight | 3.53 Oz, 0.10 Kg |
More Info
20W RMS 2.75" full range speaker with Neodymium magnet and Aluminium cone
Celestion AN3510 full range (AN 3510)
The AN3510 is a compact full range loudspeaker ideally suited for use in column line array systems or compact monitors. They feature a space efficient square chassis, a Neodymium magnet and an aluminium cone with dual cone assembly and half roll elastomer surround.
General specifications
General specifications
| Nominal Diameter | 3.5 inch, 88 mm |
| Power rating | 35W RMS, 70W continuous |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 87 dB 1W 1M |
| Frequency Range | 98-18,500 Hz |
| Resonance Frequency | 113.4 Hz |
| Xmax | 1.25 mm |
| Qts | 0.646 |
| Voice Coil Diameter | 1", 25 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Aluminium with elastomer surround |
| Chassis Type | ABS |
| Magnet | Neodymium |
| Total Weight | 5.65 Oz, 0.16 Kg |
More Info
35W RMS 3.5" full range speaker with Neodymium magnet and Aluminium cone
Celestion CF0617M 6.5" Mid range (CF0617M)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF0617M is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Copper sleeved pole piece to minimise induction rise.
An edgewound voice coil with high temperature former provides high power handling and efficient cooling.
Ideal for horn loading
General Specifications
The CF0617M is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Copper sleeved pole piece to minimise induction rise.
An edgewound voice coil with high temperature former provides high power handling and efficient cooling.
Ideal for horn loading
General Specifications
| Nominal Diameter | 6.5 inch, 165 mm |
| Power rating | 200W AES, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 300-7,000 Hz |
| Resonance Frequency | 129.3 Hz |
| Voice Coil Diameter | 1.75", 45 mm |
| Voice Coil Construction | Edgewound copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper with foam surround |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 0.6 Kg |
| Total Weight | 1.9 Kg |
More Info
High performance mid range optimised for horn loaded applications
Celestion CF1025C 10" Bass/Mid (CF1025C)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
| Nominal Diameter | 10 inch, 254 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 60-5,000 Hz |
| Resonance Frequency | 54.8 Hz |
| Xmax | 2.5 mm |
| Qts | 0.265 |
| Vas | 38.63 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edgewound copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 10.8 lb, 4.9 Kg |
More Info
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
Celestion CF1840H 18" Sub Bass (CF1840H)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1840H is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 4" high temperature voice coil with glass fibre former provides huge power handling and efficient cooling.
The 4 Ohm impedance and low qts is ideally suited to compact single 18 sub bass speakers.
General Specifications
The CF1840H is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 4" high temperature voice coil with glass fibre former provides huge power handling and efficient cooling.
The 4 Ohm impedance and low qts is ideally suited to compact single 18 sub bass speakers.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 4 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 38.5 Hz |
| Xmax | 8 mm |
| Qts | 0.351 |
| Vas | 196,7 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Carbon fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 112 Oz, 3.18 Kg |
| Total Weight | 25.5 lb, 11.6 Kg |
More Info
4 Ohm speaker offering tight, extended bass response from a mid size enclosure
Celestion CF1840JD 18" Sub Bass (CF1840JD)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1840JD is typical of the series and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,200W AES, 2,400W continuous. 4,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 37 Hz |
| Xmax | 10 mm |
| Qts | 0.4 |
| Vas | 155 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 112 Oz, 3.18 Kg |
| Total Weight | 25.5 lb, 11.6 Kg |
More Info
2,400 W speaker with response down to 30Hz in a large ported enclosure
Celestion CF18VJD 18" Sub Bass (CF18VJD)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF18VJD is the top of the range unit and is possibly the ultimate 18 inch available with huge extended, tight and powerful bass response and massive power handling. It offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 5" dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
The CF18VJD is the top of the range unit and is possibly the ultimate 18 inch available with huge extended, tight and powerful bass response and massive power handling. It offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 5" dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,600W AES, 3,200W continuous. 6,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 25-1,500 Hz |
| Resonance Frequency | 34.5 Hz |
| Xmax | 9 mm |
| Qts | 0,336 |
| Vas | 145.8 l |
| Voice Coil Diameter | 5", 125 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Carbon and Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 174 Oz, 4.93 Kg |
| Total Weight | 50.6 lb, 23 Kg |
More Info
Huge power handling with tight extended bass response down to 25Hz
Celestion FTR08-2011D 8" bass/mid (FTR08-2011D)
The Celestion FTR08-2011D is an 8 inch high quality bass/mid driver ideally suited to premium two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 200- mm |
| Power rating | 200W AES, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 70-6,000 Hz |
| Resonance Frequency | 86.1 Hz |
| Xmax | 3.5 mm |
| Qts | 0.436 |
| Vas | 8.99 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Weather treated Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 8 lb, 3.65 Kg |
More Info
400 Watt speaker suited to compact 2 way and line array systems
Celestion FTR12-3070C 12" bass/mid (FTR12-3070c)
The Celestion FTR12-3070C is a 12 inch high quality bass/mid driver ideally suited to two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 350W AES, 700W continuous, 1,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 65.1 Hz |
| Xmax | 3 mm |
| Qts | 0.32 |
| Vas | 43.7 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Weather treated glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.9 lb, 6.3 Kg |
More Info
The classic premium grade 2 way 12 inch speaker, 700 Watts, 96dB, 40-4,000Hz
Celestion FTR15-3070C 15" Bass (FTR15-3070C)
The Celestion FTR15-3070C is a 15 inch high quality, high efficiency bass driver ideally suited to three way systems or particularly to two way large format compression driver designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 41.4 Hz |
| Xmax | 3 mm |
| Qts | 0.382 |
| Vas | 187.62 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.8 lb, 6.3 Kg |
More Info
High sensitivity speaker ideally suited to 2 way large format compression driver systems
Celestion FTR15-4080F 15" Bass (FTR15-4080F)
The Celestion FTR15-4080F is a 15 inch high quality woofer ideally suited to high power three way system designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
A round copper inside/outside wound voice coil with glass fibre former for increased (800W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
A round copper inside/outside wound voice coil with glass fibre former for increased (800W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 600W AES, 1,200W continuous. 2,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-3,000 Hz |
| Resonance Frequency | 38 Hz |
| Xmax | 6 mm |
| Qts | 0.249 |
| Vas | 163,1 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 20.7 lb, 9.4 Kg |
More Info
Offering a frequency range of 30-3,000 Hz this unit is ideal for powerful compact 3 way designs
Celestion FTR15-4080HDX 15" 4 Ohm Sub Bass (FTR15-4080HDX 4 Ohm)
The Celestion FTR15-4080HDX is a 15 inch high quality sub bass woofer ideally suited to compact ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 4 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-2,500 Hz |
| Resonance Frequency | 40 Hz |
| Xmax | 8 mm |
| Qts | 0.320 |
| Vas | 111.2 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.4 lb, 9.7 Kg |
More Info
2,000 W of tight 15" bass kick from a compact ported enclosure
Celestion FTR15-4080HDX 15" 8 Ohm Sub Bass (FTR15-4080HDX 8 Ohm)
The Celestion FTR15-4080HDX is a 15 inch high quality sub bass woofer ideally suited to compact ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-2,500 Hz |
| Resonance Frequency | 40 Hz |
| Xmax | 8 mm |
| Qts | 0.320 |
| VAS | 111.2 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.4 lb, 9.7 Kg |
More Info
2,000 W of tight 15" bass kick from a compact ported enclosure
Celestion FTR18-4080FD 18" Sub Bass (FTR18-4080FD)
The Celestion FTR18-4080FD is an 18 inch high quality sub bass woofer ideally suited to compact reflex enclosures and scoop and horn loaded bins. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "flexiroll" surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "flexiroll" surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 25.2 Hz |
| Xmax | 6 mm |
| Qts | 0.286 |
| Vas | 408.72 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.6 lb, 9.8 Kg |
More Info
Dual suspension speaker with tight controlled bass from reflex, horn or bandpass enclosures
Celestion FTR18-4080HDX 18" Sub Bass (FTR18-4080HDX)
The Celestion FTR18-4080HDX is an 18 inch high quality sub bass woofer ideally suited to large ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 35.5 Hz |
| Xmax | 8 mm |
| Qts | 0.42 |
| Vas | 174.88 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.6 lb, 9.8 Kg |
More Info
Dual suspension speaker with deep powerful bass response in large enclosures