Special Offers
Celestion CDX1-1745 compression driver 8 Ohm (CDX1-1745 8 Ohm)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1745 is typical of Celestion's expertise in the field, it features a one piece PETP diaphragm and surround with "sound castle" clamping which provides high sensitivity, smooth frequency response and good power handling. This driver is suggested for use in high power 3 way systems or in 2 way designs with 12" woofers.
General Specifications
General Specifications
| Type | 1 inch throat bolt on |
| Power rating | 80W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 110 dB 1W 1M |
| Frequency range | 1,200-20,000 Hz |
| Suggested minimum crossover point | 2,200 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece PETP |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 4 x M6 threaded holes on 76 mm PCD |
| Weight | 5.1 lb, 2.3 Kg |
More Info
1" throat bolt on driver with 44 mm voice coil and one piece PETP diaphragm and surround
Celestion K12H200TC dual cone (K12H200TC)
The Celestion K12H200TC is a 12 inch dual cone bass/mid driver with extended HF response ideally suited for small PA or stage monitor applications. It can be used alone or with a suitable tweeter or compression driver and horn. It offers the following features:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W EIA, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 50-10,000 Hz |
| Resonance Frequency | 62.3 Hz |
| Xmax | 2 mm |
| Qts | 0,374 |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.41 Kg |
| Total Weight | 8.6 lb, 3.9 Kg |
More Info
12 inch loudspeaker with a "wizzer" cone extending response to above 10Khz
Celestion V-Type guitar speaker, 8 Ohm (V-Type 8 Ohm)
A new design built on 90 years of expertise using a blend of old and new design techniques. Suited to a wide variety of music styles the V-Type has a balanced tonal signature with cleans true across the frequency range and with upper mid chime and HF sparkle. Push it hard and it will provide great rock tones with sizzling overdrive and mid-band warmth. Possibly the best "bang for the buck" guitar speaker available.
General Specification
More Info
General Specification
| Nominal diameter | 12", 305 mm |
| Power rating | 70 Watts RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency range | 75 – 5,000 Hz |
| Resonance frequency | 75 Hz |
| Voice Coil Diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 31 Oz, 0.88 Kg |
| Unit Weight | 7.2 lb, 3.3 Kg |
More Info
V Type sound demo
Balanced clean tones with sizzling rock overdrive and plenty of mid band warmth
PedalTrain Classic Junior pedalboard with soft case ( PT-CLJ-SC)
Pedaltrain’s Classic Series is rooted in the company’s best-selling pedal board models. Pedaltrain has incorporated design improvements that make these models better than ever. The Classic JR model should be familiar to you. Based on the original PT-JR, the Classic JR features Pedaltrain’s original four-rail design and traditional rail spacing.
However, the Classic JR has been updated with an open front design (portholes are history) making power supply mounting more flexible and convenient. Other changes include a wider stance at 18” and the elevation has been raised by approximately 1”.
Included is Pedaltrain’s redesigned fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points)
Lifetime warranty against defects in material or workmanship
TECH SPECS
Frame: 18 x 12.5 x 3.5 inches (457 x 317 x 89 mm)
Featherweight, aircraft grade aluminum
2.6 lbs. (1.18 kg)
Soft Case: 20 x 15.25 x 5” (508 x 387 x 127 mm)
3.7 lbs. (1.68 Kg)
Included 72” of Pedaltrain’s professional grade hook-and-loop pedal fastener and plenty of zip ties for securing cables.
However, the Classic JR has been updated with an open front design (portholes are history) making power supply mounting more flexible and convenient. Other changes include a wider stance at 18” and the elevation has been raised by approximately 1”.
Included is Pedaltrain’s redesigned fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points)
Lifetime warranty against defects in material or workmanship
TECH SPECS
Frame: 18 x 12.5 x 3.5 inches (457 x 317 x 89 mm)
Featherweight, aircraft grade aluminum
2.6 lbs. (1.18 kg)
Soft Case: 20 x 15.25 x 5” (508 x 387 x 127 mm)
3.7 lbs. (1.68 Kg)
Included 72” of Pedaltrain’s professional grade hook-and-loop pedal fastener and plenty of zip ties for securing cables.
Four rail angled pedalboard with soft case, 457 x 317 x 89 mm
- 1