Celestion Bass Mid Speakers
This is the most widely used category of pro audio speaker with Celestion offering a wide range of bass/mid speakers from 5 to 15 inch models for use in 2 or 3 way designs.
500W 8" provides wide frequency range with half roll surround and large Xmax
Out of Stock
R3,750.00
500W 10" with half roll surround and large Xmax for extended bass response
Out of Stock
R5,675.00
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
Out of Stock
R5,675.00
500W 12" with half roll surround and large Xmax for extended bass response
Out of Stock
R6,850.00
400 Watt cast chassis speaker suited to compact 2 way and line array systems
Out of Stock
R3,150.00
The classic premium grade 2 way 12 inch speaker, 700 Watts, 96dB, 40-4,000Hz
Out of Stock
R5,550.00
High sensitivity speaker ideal for use with a large compression driver and 18" sub
Out of Stock
R7,250.00
Perfect choice for desktop monitors or high quality background music systems
Out of Stock
R1,275.00
Achieves optimal performance in compact 2 way enclosures with a crossover around 5KHz
Out of Stock
R1,675.00
High sensitivity with extended bass response and 300 watt power handling
Out of Stock
R2,675.00
Celestion's bestselling 12 inch speaker, 500 Watts of cost effective performance
Out of Stock
R3,300.00
Tight controlled bass response with an edge wound voice coil and vented magnet
Out of Stock
R3,700.00
Designed as a drop in upgrade for most 12" portable moulded enclosure systems
Out of Stock
R3,700.00
Ideal as a general purpose replacement unit or in your own enclosure design
Out of Stock
R3,750.00
Powerful bass response with extended upper range and 600 Watt power handling
Out of Stock
R4,000.00
Celestion CF0820BMB 8" Bass/Mid (CF0820BMB)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF0820BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
The CF0820BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
| Nominal Diameter | 8 inch, 200 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 50-6,000 Hz |
| Resonance Frequency | 50.5 Hz |
| Xmax | 7.25 mm |
| Qts | .366 |
| Vas | 22.42 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Treated paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 34.8 Oz, .99 Kg |
| Total Weight | 6.8 lb, 3.1 Kg |
| Suggested enclosure | 15-18l ported at 55 Hz |
More Info
500W 8" provides wide frequency range with half roll surround and large Xmax
Out of Stock
R3,750.00
Celestion CF1025BMB 10" Bass/Mid (CF1025BMB)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1025BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large round wound copper voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
The CF1025BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large round wound copper voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
| Nominal Diameter | 10 inch, 250 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 92.5 dB 1W 1M |
| Frequency Range | 45-5,000 Hz |
| Resonance Frequency | 40.9 Hz |
| Xmax | 6.65 mm |
| Qts | 0.355 |
| Bl | 15.28 Tm |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Round Copper |
| Former Material | Polyimide |
| Cone Material | Glass loaded paper paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 50 Oz, 1.42 Kg |
| Total Weight | 9.5 lb, 4.3 Kg |
| Suggested enclosure | 20-25l ported at 50Hz |
More Info
500W 10" with half roll surround and large Xmax for extended bass response
Out of Stock
R5,675.00
Celestion CF1025C 10" Bass/Mid (CF1025C)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
| Nominal Diameter | 10 inch, 254 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 60-5,000 Hz |
| Resonance Frequency | 54.8 Hz |
| Xmax | 4.25 mm |
| Qts | 0.265 |
| Vas | 38.63 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edgewound copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 10.8 lb, 4.9 Kg |
| Suggested enclosure | Horn loaded or 15-20l ported at 70Hz |
More Info
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
Out of Stock
R5,675.00
Celestion CF1230BMB 12" Bass/Mid (CF1230BMB)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1230BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
The CF1230BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 350W AES, 7600W continuous, 1,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-3,000 Hz |
| Resonance Frequency | 43.4 Hz |
| Xmax | 7 mm |
| Qts | 0.381 |
| Bl | 18.38 Tm |
| Voice Coil Diameter | 3", 75mm |
| Voice Coil Construction | Copper Clad Aluminium |
| Former Material | Glass fibre |
| Cone Material | Glass loaded paper paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 75 Oz, 2.2 Kg |
| Total Weight | 14.9 lb, 6.75 Kg |
| Suggested enclosure | 45-50l ported at 45Hz |
More Info
500W 12" with half roll surround and large Xmax for extended bass response
Out of Stock
R6,850.00
Celestion FTR08-2011D 8" bass/mid (FTR08-2011D)
The Celestion FTR08-2011D is an 8 inch high quality bass/mid driver ideally suited to premium two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 200- mm |
| Power rating | 200W AES, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 70-6,000 Hz |
| Resonance Frequency | 86.1 Hz |
| Xmax | 5.5 mm |
| Qts | 0.436 |
| Vas | 8.99 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Weather treated Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 8 lb, 3.65 Kg |
More Info
400 Watt cast chassis speaker suited to compact 2 way and line array systems
Out of Stock
R3,150.00
Celestion FTR12-3070C 12" bass/mid (FTR12-3070C)
The Celestion FTR12-3070C is a 12 inch high quality bass/mid driver ideally suited to two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 350W AES, 700W continuous, 1,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 65.1 Hz |
| Xmax | 5.5 mm |
| Qts | 0.321 |
| Vas | 43.7 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Weather treated glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.9 lb, 6.3 Kg |
| Suggested enclosure | 40-50l ported at 70 Hz |
More Info
The classic premium grade 2 way 12 inch speaker, 700 Watts, 96dB, 40-4,000Hz
Out of Stock
R5,550.00
Celestion FTR15-3070C 15" Bass/mid (FTR15-3070C)
The Celestion FTR15-3070C is a 15 inch high quality, high efficiency bass driver ideally suited to three way systems or particularly to two way large format compression driver designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 41.4 Hz |
| Xmax | 5.5 mm |
| Qts | 0.382 |
| Vas | 187.62 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.8 lb, 6.3 Kg |
More Info
High sensitivity speaker ideal for use with a large compression driver and 18" sub
Out of Stock
R7,250.00
Celestion TF0510 5" bass/mid (TF0510)
The Celestion TF0510 is a 5 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (50W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (50W EIA) power handling.
General specifications
| Nominal Diameter | 5 inch, 127 mm |
| Power rating | 30W AES, 60W continuous, 120W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 91 dB 1W 1M |
| Frequency Range | 130-8,000 Hz |
| Resonance Frequency | 128.1 Hz |
| Xmax | 2.4 mm |
| Qts | 0.580 |
| Vas | 7.38 l |
| Voice Coil Diameter | 1", 25 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 13 Oz, 0.37 Kg |
| Total Weight | 2.2 lb, 1 Kg |
| Suggested enclosure | 15l ported at 100Hz |
More Info
Perfect choice for desktop monitors or high quality background music systems
Out of Stock
R1,275.00
Celestion TF0615 6" bass/mid (TF0615)
The Celestion TF0615 is a 6 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
| Nominal Diameter | 6 inch, 152 mm |
| Power rating | 100W AES, 200W continuous, 400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 94 dB 1W 1M |
| Frequency Range | 85-6,000 Hz |
| Resonance Frequency | 104.7 Hz |
| Xmax | 2.5 mm |
| Qts | 0.608 |
| Vas | 6.411 l |
| Voice Coil Diameter | 1.5", 38 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 17 Oz, 0.48 Kg |
| Total Weight | 3.1 lb, 1.4 Kg |
More Info
Achieves optimal performance in compact 2 way enclosures with a crossover around 5KHz
Out of Stock
R1,675.00
Celestion TF0818 8" bass/mid (TF0818)
The Celestion TF0818 is an 8 inch general purpose bass/mid driver ideally suited to compact two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 203 mm |
| Power rating | 100W AES, 200W continuous, 400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 94 dB 1W 1M |
| Frequency Range | 70-6,000 Hz |
| Resonance Frequency | 100 Hz |
| Xmax | 5 mm |
| Qts | 0.429 |
| Vas | 9.44 l |
| Voice Coil Diameter | 1.75", 45 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 31 Oz, 0.88 Kg |
| Total Weight | 5.1 lb, 2.3 Kg |
| Suggested enclosure | 15l ported at 90Hz |
More Info
Classic 8 inch 2 way design loudspeaker with extended frequency range
Out of Stock
R2,100.00
Celestion TF1020 10" bass/mid (TF1020)
The Celestion TF1020 is a 10 inch general purpose bass/mid driver ideally suited to two way system designs and bandpass bass cabinets and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (250W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (250W EIA) power handling.
General specifications
| Nominal Diameter | 10 inch, 254 mm |
| Power rating | 150W AES, 300W continuous, 600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 60-5,500 Hz |
| Resonance Frequency | 69.4 Hz |
| Xmax | 4 mm |
| Qts | 0.323 |
| Vas | 28.75 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 42 Oz, 1.2 Kg |
| Total Weight | 8.2 lb, 3.7 Kg |
| Suggested enclosure | 30l ported at 70Hz |
More Info
High sensitivity with extended bass response and 300 watt power handling
Out of Stock
R2,675.00
Celestion TF1225 12" bass/mid (TF1225)
The Celestion TF1225 is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 50-4,000 Hz |
| Resonance Frequency | 55.6 Hz |
| Xmax | 4.5 mm |
| Qts | 0.37 |
| Vas | 67.27 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 42 Oz, 1.2 Kg |
| Total Weight | 9 lb, 4.1 Kg |
| Suggested enclosure | 40l ported at 65Hz |
More Info
Celestion's bestselling 12 inch speaker, 500 Watts of cost effective performance
Out of Stock
R3,300.00
Celestion TF1225e 12" bass/mid (TF1225e)
The Celestion TF1225e is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-3,000 Hz |
| Resonance Frequency | 52.6 Hz |
| Xmax | 5.25 mm |
| Qts | 0.333 |
| Vas | 67.71 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edge wound copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.4 Kg |
| Total Weight | 9.7 lb, 4.4 Kg |
| Suggested enclosure | 50l ported at 60Hz |
More Info
Tight controlled bass response with an edge wound voice coil and vented magnet
Out of Stock
R3,700.00
Celestion TF1230S 12" bass/mid (TF1230S)
The Celestion TF1230S is a 12 inch general purpose bass/mid driver ideally suited to use in two way moulded cabinet system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Increased chassis diameter (317.5mm) with 8 mounting holes.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound copper clad aluminium voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Increased chassis diameter (317.5mm) with 8 mounting holes.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound copper clad aluminium voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-4,000 Hz |
| Resonance Frequency | 60.3 Hz |
| Xmax | 4.5 mm |
| Qts | 0.374 |
| Vas | 54.41 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Edge wound copper clad aluminium |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 9.5 lb, 4.3 Kg |
| Suggested enclosure | Typical 12" 2 way moulded enclosure |
More Info
Designed as a drop in upgrade for most 12" portable moulded enclosure systems
Out of Stock
R3,700.00
Celestion TF1525 15" bass/mid (TF1525)
The Celestion TF1525 is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 40-3,000 Hz |
| Resonance Frequency | 47.6 Hz |
| Xmax | 4.5 mm |
| Qts | 0.493 |
| Vas | 148.41 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 42 Oz, 1.2 Kg |
| Total Weight | 11.5 lb, 5.2 Kg |
| Suggested enclosure | 100l ported at 55Hz |
More Info
Ideal as a general purpose replacement unit or in your own enclosure design
Out of Stock
R3,750.00
Celestion TF1525e 15" bass/mid (TF1525e)
The Celestion TF1525e is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 45-3,500 Hz |
| Resonance Frequency | 47.5 Hz |
| Xmax | 5.25 mm |
| Qts | 0.473 |
| Vas | 141.77 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edge wound copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.4 Kg |
| Total Weight | 10.6 lb, 4.8 Kg |
| Suggested enclosure | 100l ported at 55Hz |
More Info
Powerful bass response with extended upper range and 600 Watt power handling
Out of Stock
R4,000.00