Featured
-
Celestion H1-7050 Aluminium horn
R1,500.00
-
PedalTrain Metro 20 pedalboard with Soft Case
R3,000.00
-
PedalTrain NANO + Pedalboard with Soft Case
R2,250.00
-
PedalTrain Classic 1 pedalboard with Soft case
R5,200.00
-
Celestion CDX1-1447 compression driver
R2,075.00
-
Celestion G12M-65 Creamback guitar speaker, 8 Ohm
R5,550.00
-
Celestion Pulse10 bass guitar speaker
R3,100.00
-
Celestion CF0820BMB 8" Bass/Mid
R3,750.00
The Celestion Truvox 1525 is a 15 inch general purpose bass/mid driver ideally suited as a drop in replacement in most 15 inch 2 way systems and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 49 Hz |
| Xmax | 4.75 mm |
| Qts | 0.756 |
| Vas | 135.4 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Copper clad aluminium |
| Former Material | Polyimide |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.42 Kg |
| Total Weight | 10.12 lb, 4.67 Kg |