Featured
-
Celestion H1-7050 Aluminium horn
R1,500.00
-
PedalTrain Metro 20 pedalboard with Soft Case
R3,000.00
-
PedalTrain NANO + Pedalboard with Soft Case
R2,250.00
-
PedalTrain Classic 1 pedalboard with Soft case
R5,200.00
-
Celestion CDX1-1447 compression driver
R2,075.00
-
Celestion G12M-65 Creamback guitar speaker, 8 Ohm
R5,550.00
-
Celestion Pulse10 bass guitar speaker
R3,100.00
-
Celestion CF0820BMB 8" Bass/Mid
R3,750.00
The Celestion TF1225e is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-3,000 Hz |
| Resonance Frequency | 52.6 Hz |
| Xmax | 5.25 mm |
| Qts | 0.333 |
| Vas | 67.71 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edge wound copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.4 Kg |
| Total Weight | 9.7 lb, 4.4 Kg |
| Suggested enclosure | 50l ported at 60Hz |