Celestion Bass Mid Speakers
This is the most widely used category of pro audio speaker with Celestion offering a wide range of bass/mid speakers from 5 to 15 inch models for use in 2 or 3 way designs.
High sensitivity plus high power handling bass mid unit ideal with larger compression drivers
Out of Stock
R4,700.00
Drop in upgrade or replacement for most manufacturer's 6 inch 2 way enclosures
Out of Stock
R1,550.00
Drop in upgrade or replacement for most manufacturer's 8 inch 2 way enclosures
Out of Stock
R2,500.00
Drop in upgrade or replacement for most manufacturer's 12 inch 2 way enclosures
Out of Stock
R3,550.00
Drop in upgrade or replacement for most manufacturer's 15 inch 2 way enclosures
Out of Stock
R3,950.00
Celestion TF1530 15" bass/mid (TF1530)
The Celestion TF1530 is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A large vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (600W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A large vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (600W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-3,000 Hz |
| Resonance Frequency | 42 Hz |
| Xmax | 4 mm |
| Qts | 0.281 |
| Vas | 162.2 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 86 Oz, 2.44Kg |
| Total Weight | 15.2 lb, 6.9 Kg |
| Suggested enclosure | 100l ported at 65Hz |
More Info
High sensitivity plus high power handling bass mid unit ideal with larger compression drivers
Out of Stock
R4,700.00
Celestion TN1230 12" bass/mid (TN1230)
The Celestion TN1230 is a 12 inch lightweight general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented neodymium magnet assembly with heatsink for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented neodymium magnet assembly with heatsink for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 50-4,500 Hz |
| Resonance Frequency | 46.6 Hz |
| Xmax | 3.75 mm |
| Qts | 0.35 |
| Vas | 64.33 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Round wound copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Neodymium |
| Total Weight | 4.4 lb, 2 Kg |
| Suggested enclosure | 30l ported at 70Hz |
More Info
Controlled bass, extended mids and a lightweight Neodymium magnet
Out of Stock
R5,650.00
Celestion Truvox 0615 6" bass/mid (Truvox 0615)
The Celestion Truvox0615 is a 6 inch general purpose bass/mid driver ideally suited as a drop in replacement in most 6 inch 2 way systems and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
| Nominal Diameter | 6 inch, 152 mm |
| Power rating | 100W AES, 200W continuous, 400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 80-5,000 Hz |
| Resonance Frequency | 89.6 Hz |
| Xmax | 3.5 mm |
| Qts | 0.472 |
| Vas | 7.41 l |
| Voice Coil Diameter | 1.5", 38 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 20 Oz, 0.56 Kg |
| Total Weight | 3.5 lb, 1.6 Kg |
More Info
Drop in upgrade or replacement for most manufacturer's 6 inch 2 way enclosures
Out of Stock
R1,550.00
Celestion Truvox 0820 8" bass/mid (Truvox 0820)
The Celestion Truvox0820 is an 8 inch general purpose bass/mid driver ideally suited as a drop in replacement in most 8 inch 2 way systems and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A cellulose cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (300W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A cellulose cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (300W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 200 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 70-6,000 Hz |
| Resonance Frequency | 74.1 Hz |
| Xmax | 5 mm |
| Qts | 0.390 |
| Vas | 17.25 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Cellulose |
| Chassis Type | Pressed steel |
| Magnet | Ferrite |
| Total Weight | 6.6 lb, 3 Kg |
More Info
Drop in upgrade or replacement for most manufacturer's 8 inch 2 way enclosures
Out of Stock
R2,500.00
Celestion Truvox 1225 15" bass/mid (Truvox 1225)
The Celestion Truvox 1225 is a 12 inch general purpose bass/mid driver ideally suited as a drop in replacement in most 12 inch 2 way systems and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-4,000 Hz |
| Resonance Frequency | 60 Hz |
| Xmax | 4.75 mm |
| Qts | 0.623 |
| Vas | 135.4 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Copper clad aluminium |
| Former Material | Polyimide |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.42 Kg |
| Total Weight | 10.12 lb, 4.67 Kg |
More Info
Drop in upgrade or replacement for most manufacturer's 12 inch 2 way enclosures
Out of Stock
R3,550.00
Celestion Truvox 1525 15" bass/mid (Truvox 1525)
The Celestion Truvox 1525 is a 15 inch general purpose bass/mid driver ideally suited as a drop in replacement in most 15 inch 2 way systems and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 49 Hz |
| Xmax | 4.75 mm |
| Qts | 0.756 |
| Vas | 135.4 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Copper clad aluminium |
| Former Material | Polyimide |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.42 Kg |
| Total Weight | 10.12 lb, 4.67 Kg |
More Info
Drop in upgrade or replacement for most manufacturer's 15 inch 2 way enclosures
Out of Stock
R3,950.00