Featured
-
Celestion H1-7050 Aluminium horn R1,575.00
-
PedalTrain NANO + Pedalboard with Soft Case R2,150.00
-
PedalTrain Classic 1 pedalboard with Soft case R4,550.00
-
PedalTrain Metro 16 pedalboard with hard case R2,500.00
-
Celestion CDX1-1447 compression driver R2,075.00
-
Celestion G12M-65 Creamback guitar speaker, 8 Ohm R5,500.00
-
Celestion Pulse10 bass guitar speaker R3,050.00
-
Celestion CF0820BMB 8" Bass/Mid R3,675.00
The Celestion Truvox 1525 is a 15 inch general purpose bass/mid driver ideally suited as a drop in replacement in most 15 inch 2 way systems and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Supplied with front and rear mounting gaskets.
A vented magnet assembly for enhanced cooling
A glass fibre loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
Nominal Diameter | 15 inch, 381 mm |
Power rating | 300W AES, 600W continuous, 1,200W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 96 dB 1W 1M |
Frequency Range | 40-4,000 Hz |
Resonance Frequency | 49 Hz |
Xmax | 4.75 mm |
Qts | 0.756 |
Vas | 135.4 l |
Voice Coil Diameter | 2.5", 64 mm |
Voice Coil Construction | Copper clad aluminium |
Former Material | Polyimide |
Cone Material | Glass fibre loaded paper |
Chassis Type | Pressed steel |
Magnet | Ferrite, 50 Oz, 1.42 Kg |
Total Weight | 10.12 lb, 4.67 Kg |