Featured
-
Celestion H1-7050 Aluminium horn
R1,500.00
-
PedalTrain Metro 20 pedalboard with Soft Case
R3,000.00
-
PedalTrain NANO + Pedalboard with Soft Case
R2,250.00
-
PedalTrain Classic 1 pedalboard with Soft case
R5,200.00
-
Celestion CDX1-1447 compression driver
R2,075.00
-
Celestion G12M-65 Creamback guitar speaker, 8 Ohm
R5,550.00
-
Celestion Pulse10 bass guitar speaker
R3,100.00
-
Celestion CF0820BMB 8" Bass/Mid
R3,750.00
The Celestion FTR15-3070C is a 15 inch high quality, high efficiency bass driver ideally suited to three way systems or particularly to two way large format compression driver designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 41.4 Hz |
| Xmax | 5.5 mm |
| Qts | 0.382 |
| Vas | 187.62 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.8 lb, 6.3 Kg |