Featured
-
Celestion H1-7050 Aluminium horn R1,575.00
-
PedalTrain NANO + Pedalboard with Soft Case R2,150.00
-
PedalTrain Classic 1 pedalboard with Soft case R4,550.00
-
PedalTrain Metro 16 pedalboard with hard case R2,500.00
-
Celestion CDX1-1447 compression driver R2,075.00
-
Celestion G12M-65 Creamback guitar speaker, 8 Ohm R5,500.00
-
Celestion Pulse10 bass guitar speaker R3,050.00
-
Celestion CF0820BMB 8" Bass/Mid R3,675.00
The Celestion FTR12-3070C is a 12 inch high quality bass/mid driver ideally suited to two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
Nominal Diameter | 12 inch, 305 mm |
Power rating | 350W AES, 700W continuous, 1,400W peak |
Nominal Impedance | 8 Ohms |
Sensitivity | 96 dB 1W 1M |
Frequency Range | 40-4,000 Hz |
Resonance Frequency | 65.1 Hz |
Xmax | 5.5 mm |
Qts | 0.321 |
Vas | 43.7 l |
Voice Coil Diameter | 3", 75 mm |
Voice Coil Construction | Inside/outside wound round copper |
Former Material | Glass fibre |
Cone Material | Weather treated glass fibre loaded paper |
Chassis Type | Cast Aluminium |
Magnet | Ferrite, 81 Oz, 2.3 Kg |
Total Weight | 13.9 lb, 6.3 Kg |
Suggested enclosure | 40-50l ported at 70 Hz |