Celestion
An inexpensive upgrade for your entry level amp that will reward with Celestion tone and growl
Out of Stock
R1,900.00
An inexpensive upgrade for your entry level amp that will reward with Celestion tone and growl
Perfect choice for desktop monitors or high quality background music systems
Out of Stock
R1,800.00
Celestion's bestselling 12 inch speaker, 500 Watts of cost effective performance
Out of Stock
R3,800.00
Tight controlled bass response with an edge wound voice coil and vented magnet
Out of Stock
R4,050.00
Designed as a drop in upgrade for most 12" portable moulded enclosure systems
Out of Stock
R4,050.00
Ideal as a general purpose replacement unit or in your own enclosure design
Out of Stock
R4,150.00
Powerful bass response with extended upper range and 600 Watt power handling
Out of Stock
R4,300.00
High sensitivity plus high power handling bass mid unit ideal with larger compression drivers
Out of Stock
R4,850.00
Celestion Ten 30 guitar speaker, 16 Ohm (Ten 30, 16 Ohm)
Rich and expressive the Ten 30 combines warm lows with a vocal midrange and an articulate top end. The clean sound is open and revealing, however, push hard and you're rewarded with full blooded Celestion grind.
This incredible value speaker will breathe new life into your small, entry level combo or "bedroom blaster"
General Specifications
This incredible value speaker will breathe new life into your small, entry level combo or "bedroom blaster"
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 30W RMS |
| Nominal Impedance | 16 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency range | 85-5,000 Hz |
| Resonance frequency | 94 Hz |
| Voice coil diameter | 1.25", 31.25 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 13 Oz, 0.37 Kg |
| Unit Weight | 3.5 lb, 1.6 Kg |
More Info
An inexpensive upgrade for your entry level amp that will reward with Celestion tone and growl
Out of Stock
R1,900.00
Celestion Ten 30 guitar speaker, 8 Ohm (Ten 30, 8 Ohm)
Rich and expressive the Ten 30 combines warm lows with a vocal midrange and an articulate top end. The clean sound is open and revealing, however, push hard and you're rewarded with full blooded Celestion grind.
This incredible value speaker will breathe new life into your small, entry level combo or "bedroom blaster"
General Specifications
This incredible value speaker will breathe new life into your small, entry level combo or "bedroom blaster"
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 30W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency range | 85-5,000 Hz |
| Resonance frequency | 94 Hz |
| Voice coil diameter | 1.25", 31.25 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 13 Oz, 0.37 Kg |
| Unit Weight | 3.5 lb, 1.6 Kg |
More Info
An inexpensive upgrade for your entry level amp that will reward with Celestion tone and growl
Celestion TF0510 5" bass/mid (TF0510)
The Celestion TF0510 is a 5 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (50W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (50W EIA) power handling.
General specifications
| Nominal Diameter | 5 inch, 127 mm |
| Power rating | 30W AES, 60W continuous, 120W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 91 dB 1W 1M |
| Frequency Range | 130-8,000 Hz |
| Resonance Frequency | 128.1 Hz |
| Xmax | 2.4 mm |
| Qts | 0.580 |
| Vas | 7.38 l |
| Voice Coil Diameter | 1", 25 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 13 Oz, 0.37 Kg |
| Total Weight | 2.2 lb, 1 Kg |
| Suggested enclosure | 15l ported at 100Hz |
More Info
Perfect choice for desktop monitors or high quality background music systems
Out of Stock
R1,800.00
Celestion TF0510MR 5" Mid Range (TF0510MR)
The Celestion TF0510MR is a dedicated mid range driver for use in 3 way systems. It has the following highlights:
Broad dispersion.
A closed back chassis which simplifies system design as the mid range does not need a separate enclosure.
A high temperature copper voice coil with polyimide former for increased (50W EIA) power handling.
General specifications
Broad dispersion.
A closed back chassis which simplifies system design as the mid range does not need a separate enclosure.
A high temperature copper voice coil with polyimide former for increased (50W EIA) power handling.
General specifications
| Nominal Diameter | 5 inch, 127 mm |
| Power rating | 30W AES, 60W continuous, 120W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 400-8,000 Hz |
| Resonance Frequency | 482 Hz |
| Voice Coil Diameter | 1", 25 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 0.37 Kg |
| Total Weight | 1.1 Kg |
More Info
Closed back 60 Watt dedicated mid range for compact 3 way systems
Out of Stock
R1,800.00
Celestion TF0615MR 6" Mid Range (TF0615MR)
The Celestion TF0615MR is a dedicated mid range driver for use in large, 3 way systems. It has the following highlights:
High efficiency and power handling.
A closed back chassis which simplifies system design as the mid range does not need a separate enclosure.
A high temperature copper voice coil with polyimide former for increased (75W EIA) power handling.
General specifications
High efficiency and power handling.
A closed back chassis which simplifies system design as the mid range does not need a separate enclosure.
A high temperature copper voice coil with polyimide former for increased (75W EIA) power handling.
General specifications
| Nominal Diameter | 6 inch, 152 mm |
| Power rating | 50W AES, 100W continuous, 200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 500-5,000 Hz |
| Resonance Frequency | 553 Hz |
| Voice Coil Diameter | 1.5", 38 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 0.48 Kg |
| Total Weight | 1.4 Kg |
More Info
Closed back 100 Watt dedicated mid range for larger 3 way systems
Out of Stock
R2,050.00
Celestion TF0818 8" bass/mid (TF0818)
The Celestion TF0818 is an 8 inch general purpose bass/mid driver ideally suited to compact two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (150W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 203 mm |
| Power rating | 100W AES, 200W continuous, 400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 94 dB 1W 1M |
| Frequency Range | 70-6,000 Hz |
| Resonance Frequency | 100 Hz |
| Xmax | 5 mm |
| Qts | 0.429 |
| Vas | 9.44 l |
| Voice Coil Diameter | 1.75", 45 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 31 Oz, 0.88 Kg |
| Total Weight | 5.1 lb, 2.3 Kg |
| Suggested enclosure | 15l ported at 90Hz |
More Info
Classic 8 inch 2 way design loudspeaker with extended frequency range
Out of Stock
R2,600.00
Celestion TF0818MR 8" Mid Range (TF0818MR)
The Celestion TF0818MR is a dedicated mid range driver for use in large, high power, 3 way systems. It has the following highlights:
High efficiency and power handling.
A closed back chassis which simplifies system design as the mid range does not need a separate enclosure.
A high temperature copper voice coil with polyimide former for increased (150W EIA) power handling.
General specifications
High efficiency and power handling.
A closed back chassis which simplifies system design as the mid range does not need a separate enclosure.
A high temperature copper voice coil with polyimide former for increased (150W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 203 mm |
| Power rating | 100W AES, 200W continuous, 400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 800-5,000 Hz |
| Resonance Frequency | 453 Hz |
| Voice Coil Diameter | 1.75", 44 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 0.57 Kg |
| Total Weight | 1.4 Kg |
More Info
Closed back 200 Watt dedicated mid range for large 3 way systems
Celestion TF1020 10" bass/mid (TF1020)
The Celestion TF1020 is a 10 inch general purpose bass/mid driver ideally suited to two way system designs and bandpass bass cabinets and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (250W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (250W EIA) power handling.
General specifications
| Nominal Diameter | 10 inch, 254 mm |
| Power rating | 150W AES, 300W continuous, 600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 60-5,500 Hz |
| Resonance Frequency | 69.4 Hz |
| Xmax | 4 mm |
| Qts | 0.323 |
| Vas | 28.75 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 42 Oz, 1.2 Kg |
| Total Weight | 8.2 lb, 3.7 Kg |
| Suggested enclosure | 30l ported at 70Hz |
More Info
High sensitivity with extended bass response and 300 watt power handling
Celestion TF1225 12" bass/mid (TF1225)
The Celestion TF1225 is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 50-4,000 Hz |
| Resonance Frequency | 55.6 Hz |
| Xmax | 4.5 mm |
| Qts | 0.37 |
| Vas | 67.27 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 42 Oz, 1.2 Kg |
| Total Weight | 9 lb, 4.1 Kg |
| Suggested enclosure | 40l ported at 65Hz |
More Info
Celestion's bestselling 12 inch speaker, 500 Watts of cost effective performance
Out of Stock
R3,800.00
Celestion TF1225e 12" bass/mid (TF1225e)
The Celestion TF1225e is a 12 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-3,000 Hz |
| Resonance Frequency | 52.6 Hz |
| Xmax | 5.25 mm |
| Qts | 0.333 |
| Vas | 67.71 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edge wound copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.4 Kg |
| Total Weight | 9.7 lb, 4.4 Kg |
| Suggested enclosure | 50l ported at 60Hz |
More Info
Tight controlled bass response with an edge wound voice coil and vented magnet
Out of Stock
R4,050.00
Celestion TF1230S 12" bass/mid (TF1230S)
The Celestion TF1230S is a 12 inch general purpose bass/mid driver ideally suited to use in two way moulded cabinet system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
Increased chassis diameter (317.5mm) with 8 mounting holes.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound copper clad aluminium voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
Increased chassis diameter (317.5mm) with 8 mounting holes.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound copper clad aluminium voice coil with Polyimide former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-4,000 Hz |
| Resonance Frequency | 60.3 Hz |
| Xmax | 4.5 mm |
| Qts | 0.374 |
| Vas | 54.41 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Edge wound copper clad aluminium |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 9.5 lb, 4.3 Kg |
| Suggested enclosure | Typical 12" 2 way moulded enclosure |
More Info
Designed as a drop in upgrade for most 12" portable moulded enclosure systems
Out of Stock
R4,050.00
Celestion TF1525 15" bass/mid (TF1525)
The Celestion TF1525 is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (400W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 40-3,000 Hz |
| Resonance Frequency | 47.6 Hz |
| Xmax | 4.5 mm |
| Qts | 0.493 |
| Vas | 148.41 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 42 Oz, 1.2 Kg |
| Total Weight | 11.5 lb, 5.2 Kg |
| Suggested enclosure | 100l ported at 55Hz |
More Info
Ideal as a general purpose replacement unit or in your own enclosure design
Out of Stock
R4,150.00
Celestion TF1525e 15" bass/mid (TF1525e)
The Celestion TF1525e is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (450W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An edge wound voice coil with glass fibre former for increased (450W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 45-3,500 Hz |
| Resonance Frequency | 47.5 Hz |
| Xmax | 5.25 mm |
| Qts | 0.473 |
| Vas | 141.77 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edge wound copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.4 Kg |
| Total Weight | 10.6 lb, 4.8 Kg |
| Suggested enclosure | 100l ported at 55Hz |
More Info
Powerful bass response with extended upper range and 600 Watt power handling
Out of Stock
R4,300.00
Celestion TF1530 15" bass/mid (TF1530)
The Celestion TF1530 is a 15 inch general purpose bass/mid driver ideally suited to two way system designs and features the following design highlights:
A rugged steel chassis which is extremely rigid yet lightweight.
A large vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (600W EIA) power handling.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A large vented magnet assembly for enhanced cooling
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (600W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-3,000 Hz |
| Resonance Frequency | 42 Hz |
| Xmax | 4 mm |
| Qts | 0.281 |
| Vas | 162.2 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 86 Oz, 2.44Kg |
| Total Weight | 15.2 lb, 6.9 Kg |
| Suggested enclosure | 100l ported at 65Hz |
More Info
High sensitivity plus high power handling bass mid unit ideal with larger compression drivers
Out of Stock
R4,850.00
Celestion TFX0515 Co-axial full range (TFX0515)
Celestion's TFX series co-axials offer highly cost effective speakers with wide dispersion and high power handling.
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. The roll surround woofer and longer voice coil allows for extended bass response from a very compact driver. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0515-Crossover
General Specifications
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. The roll surround woofer and longer voice coil allows for extended bass response from a very compact driver. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0515-Crossover
General Specifications
| LF | HF | |
| Nominal Diameter | 5 inch, 125 mm | |
| Power rating | 300W continuous | 20W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 89dB 1W 1M | 96dB 1W 1M |
| Frequency Range | 80-4,000 Hz | 1,400-20,000 Hz |
| Resonance Frequency | 80 Hz | |
| Xmax | 2.25 mm | |
| Qts | 0.627 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 1.5", 38 mm | 1", 25 mm |
| Voice Coil Construction | Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Polyimide | |
| Cone/Diaphragm | Kevlar loaded paper | Silk dome |
| Magnet | Ferrite, 0.65Kg | |
| Weight | 1.6 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED5" high power handling full range speaker with co-axial dome tweeter
Out of Stock
R2,500.00
Celestion TFX0615 Co-axial full range (TFX0615)
Celestion's TFX series co-axials offer highly cost effective speakers with wide dispersion and high power handling.
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0615-Crossover
General Specifications
The silk dome tweeter provides smooth natural HF and is mounted inside the LF voice coil to provide true co-incident time aligned performance. Note that no crossover is provided, a suitable design can be downloaded on this link. TFX0615-Crossover
General Specifications
| LF | HF | |
| Nominal Diameter | 5 inch, 125 mm | |
| Power rating | 300W continuous | 20W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 94dB 1W 1M | 98dB 1W 1M |
| Frequency Range | 100-6,000 Hz | 1,700-20,000 Hz |
| Resonance Frequency | 97 Hz | |
| Xmax | 3.75 mm | |
| Qts | 0.376 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 1.5", 38 mm | 1", 25 mm |
| Voice Coil Construction | Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Polyimide | |
| Cone/Diaphragm | Kevlar loaded paper | Silk dome |
| Magnet | Ferrite, 0.65Kg | |
| Weight | 1.6 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED6.5" high power handling full range speaker with co-axial dome tweeter
Out of Stock
R2,800.00