Celestion
90 x 40 degree horn with 1 inch throat for threaded mount compression drivers
Out of Stock
R750.00
Aggressive crunch and mid range warmth made this the hard rock speaker of the early 80s
Out of Stock
R5,750.00
Aggressive crunch and mid range warmth made this the hard rock speaker of the early 80s
Out of Stock
R5,750.00
Late sixties classic rock tone a tight bottom end, punchy upper mids and sparkling highs.
Out of Stock
R5,750.00
Late sixties classic rock tone a tight bottom end, punchy upper mids and sparkling highs.
Out of Stock
R5,750.00
Used by Fender, Marshall & Peavey for warm detailed mids & tops with searing rock overdrive when pushed hard
Out of Stock
R3,350.00
Used by Fender, Marshall & Peavey for warm detailed mids & tops with searing rock overdrive when pushed hard
Weighing only 2.6 Kg and offering a tight low end with clean neutral mids and a smooth upper register
Out of Stock
R7,050.00
Weighing only 2.6 Kg and offering a tight low end with clean neutral mids and a smooth upper register
Celestion G15V-100 Fullback guitar speaker 8 Ohm (G15V-100 Fullback 8 Ohm)
With a larger cone delivering an extended low end response, the 100-watt Fullback has a big, deep voice, delivering smooth and expressive tones seemingly without effort.
While retaining our classic, harmonically complex and finely detailed mid-range, the larger 15" cone of the Fullback shifts this characteristic down a register. Clean sounds are warm and expressive, revealing and enhancing the qualities of your amp and guitar without unnecessary colouration. Overdrive sounds are complex and musical; push harder for a weighty, contralto growl, with a softer, warmer mid-range.
General Specifications| Nominal diameter | 15", 381 mm |
| Power rating | 100W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency range | 65-4000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 2", 50 mm |
| Magnet type | Ceramic |
| Magnet weight | 40 Oz, 1.10 Kg |
| Unit weight | 10.6 lb, 4.8 Kg |
More Info
Deep voiced low end with harmonically complex warmer mids
Out of Stock
R6,500.00
Celestion H1-7050 Aluminium horn (H1 7050)
The H1-7050 is an exponential horn with a 1 inch throat manufactured from cast aluminium and features elastomer damping panels to prevent ringing. The square chassis allows for mounting horizontally or vertically depending on the dispersion design requirement.
General Specifications
Dispersion 70 x 50 degrees
Weight 0.7 Kg
Cut off 1.5KHz
General Specifications
Dispersion 70 x 50 degrees
Weight 0.7 Kg
Cut off 1.5KHz
More Info
70 x 50 horn with 1 inch throat for bolt on compression drivers
Celestion H1-9040 flanged horn (H1 9040P)
The H1-9040 is an exponential horn with a 1 inch throat manufactured from ABS for use with bolt on drivers. The long throat design improves projection and, together with the dispersion characteristic, ensures this horn is ideally suited to 2 way designs with 12" or 15" woofers.
General Specifications
Dispersion 90 x 40 degrees
Weight 0.66Kg
Cut off 1.5KHz
General Specifications
Dispersion 90 x 40 degrees
Weight 0.66Kg
Cut off 1.5KHz
More Info
90 x 40 horn with 1 inch throat for bolt on compression drivers
Celestion H1-SC8050 threaded horn (H1-SC8050)
The H1-SC8050 is an exponential horn with a 1 inch throat compatible with screw on drivers. It is manufactured from ABS with a square chassis which allows for mounting horizontally or vertically depending on the dispersion design requirement. Ideal for use in 3 way designs or 2 way systems with 12" or smaller woofers.
General Specifications
Dispersion 80 x 50 degrees
Weight 0.2 Kg
Cut off 1.5KHz
More Info
General Specifications
Dispersion 80 x 50 degrees
Weight 0.2 Kg
Cut off 1.5KHz
More Info
80 x 50 degree horn with 1 inch throat for threaded mount compression drivers
Celestion H1-SC9040 threaded horn (H1-SC9040P)
The H1-SC9040 is an exponential horn with a 1 inch throat manufactured from ABS for use with screw on drivers. The long throat design improves projection and, together with the dispersion characteristic, ensures this horn is ideally suited to 2 way designs with 12" or 15" woofers.
General Specifications
Dispersion 90 x 40 degrees
Weight 0.23Kg
Cut off 2 KHz
General Specifications
Dispersion 90 x 40 degrees
Weight 0.23Kg
Cut off 2 KHz
More Info
90 x 40 degree horn with 1 inch throat for threaded mount compression drivers
Out of Stock
R750.00
Celestion Heritage G12-65 guitar speaker, 15 Ohm (Heritage G12-65 15 Ohm)
Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best guitar speakers ever produced for use in a 4x12 cabinet. With its fast attack and tightly controlled low end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 65W RMS |
| Nominal impedance | 15 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency range | 80-5000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 35 Oz, 0.99 Kg |
| Unit weight | 7.7 lb, 3.5 Kg |
More Info
Aggressive crunch and mid range warmth made this the hard rock speaker of the early 80s
Out of Stock
R5,750.00
Celestion Heritage G12-65 guitar speaker, 8 Ohm (Heritage G12-65 8 Ohm)
Originally created in the late 70s using more modern materials and techniques for a higher power handling, the G12-65 is widely regarded as one of the best guitar speakers ever produced for use in a 4x12 cabinet. With its fast attack and tightly controlled low end, the G12-65 had become a firm favourite with hard rock players by the early 80s. The precisely tuned mid-range and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 65W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency range | 80-5000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 35 Oz, 0.99 Kg |
| Unit weight | 7.7 lb, 3.5 Kg |
More Info
Aggressive crunch and mid range warmth made this the hard rock speaker of the early 80s
Out of Stock
R5,750.00
Celestion Heritage G12-H 75 guitar speaker, 15 Ohm (Heritage G12-H 75 15 Ohm)
Designed to punch through the mix for the rock lead guitarists in the late sixties especially when used in 4x12 cabs. This newly released Heritage version is a faithful reproduction of the classic, handcrafted in the UK and fitted with the famous period green back can.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 30W RMS |
| Nominal impedance | 15 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 75-5000 Hz |
| Resonance frequency | 75 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Late sixties classic rock tone a tight bottom end, punchy upper mids and sparkling highs.
Out of Stock
R5,750.00
Celestion Heritage G12-H 75 guitar speaker, 8 Ohm (Heritage G12-H 75 8 Ohm)
Designed to punch through the mix for the rock lead guitarists in the late sixties especially when used in 4x12 cabs. This newly released Heritage version is a faithful reproduction of the classic, handcrafted in the UK and fitted with the famous period green back can.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 30W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 75-5000 Hz |
| Resonance frequency | 75 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Late sixties classic rock tone a tight bottom end, punchy upper mids and sparkling highs.
Out of Stock
R5,750.00
Celestion Heritage G12-M 55 guitar speaker, 15 Ohm (Heritage G12-M 55 15 Ohm)
Originally intended for bass with a 55Hz cone resonance the G12-M 55 rapidly found favour with electric guitarists looking for warmth and low end grunt. This newly released Heritage version is a faithful reproduction of the classic, handcrafted in the UK and fitted with the famous period black back can.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 25W RMS |
| Nominal impedance | 15 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 55-5000 Hz |
| Resonance frequency | 55 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 35 Oz, 0.99 Kg |
| Unit weight | 7.9 lb, 3.6 Kg |
More Info
Early 1970s classic Blackback with punch, sparkle and sweet midrange
Out of Stock
R5,750.00
Celestion Heritage G12-M 55 guitar speaker, 8 Ohm (Heritage G12-M 55 8 Ohm)
Originally intended for bass with a 55Hz cone resonance the G12-M 55 rapidly found favour with electric guitarists looking for warmth and low end grunt. This newly released Heritage version is a faithful reproduction of the classic, handcrafted in the UK and fitted with the famous period black back can.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 25W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 55-5000 Hz |
| Resonance frequency | 55 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 35 Oz, 0.99 Kg |
| Unit weight | 7.9 lb, 3.6 Kg |
More Info
Early 1970s classic Blackback with punch, sparkle and sweet midrange
Out of Stock
R5,750.00
Celestion K12H200TC dual cone (K12H200TC)
The Celestion K12H200TC is a 12 inch dual cone bass/mid driver with extended HF response ideally suited for small PA or stage monitor applications. It can be used alone or with a suitable tweeter or compression driver and horn. It offers the following features:
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.
General specifications
A rugged steel chassis which is extremely rigid yet lightweight.
A vented magnet assembly for enhanced cooling.
A Kevlar loaded cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
Optimised cone neck/voice coil assembly providing increased strength and improved upper frequency performance.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 300W EIA, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 50-10,000 Hz |
| Resonance Frequency | 62.3 Hz |
| Xmax | 2 mm |
| Qts | 0,374 |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Pressed steel |
| Magnet | Ferrite, 50 Oz, 1.41 Kg |
| Total Weight | 8.6 lb, 3.9 Kg |
More Info
12 inch loudspeaker with a "wizzer" cone extending response to above 10Khz
Celestion Midnight 60, 16 Ohm (Midnight 60 16 Ohm)
A new design making use of the V Type moving parts but with an "L' magnet leading to a different tonal signature with well balanced cleans, warm detailed mids and an HF sparkle. Push into overdrive for searing rock tones with impact and the ability to cut through the mix.
General Specification
More Info
General Specification
| Nominal diameter | 12", 305 mm |
| Power rating | 60 Watts RMS |
| Nominal Impedance | 16 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 75 – 5,000 Hz |
| Resonance frequency | 75 Hz |
| Voice Coil Diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 20 Oz, 0.6 Kg |
| Unit Weight | 5.5 lb, 2.5 Kg |
More Info
Demo Video
Used by Fender, Marshall & Peavey for warm detailed mids & tops with searing rock overdrive when pushed hard
Out of Stock
R3,350.00
Celestion Midnight 60, 8 Ohm (Midnight 60 8 Ohm)
A new design making use of the V Type moving parts but with an "L' magnet leading to a different tonal signature with well balanced cleans, warm detailed mids and an HF sparkle. Push into overdrive for searing rock tones with impact and the ability to cut through the mix.
General Specification
More Info
General Specification
| Nominal diameter | 12", 305 mm |
| Power rating | 60 Watts RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 75 – 5,000 Hz |
| Resonance frequency | 75 Hz |
| Voice Coil Diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 20 Oz, 0.6 Kg |
| Unit Weight | 5.5 lb, 2.5 Kg |
More Info
Demo Video
Used by Fender, Marshall & Peavey for warm detailed mids & tops with searing rock overdrive when pushed hard
Celestion Neo 250 Copperback guitar speaker, 16 Ohm (Neo 250 Copperback 16 Ohm)
Sacrificing none of the delicious musicality of your favourite Celestions, the Neo 250 Copperback is a neodymium speaker that supplies tons of tone without the signature cone break-up immediately associated with the classic Celestion growl. Perfect for high volume clean tones in Jazz, Country, Blues and early Rock and Roll.
The ideal replacement for the Electrovoice EVM12L
It's definitely not the “brown sound”, but for those wanting more transparency and less midrange vocal intensity the Neo 250 reveals the best from your amplifier and playing without additional colouration. The speaker's unique response has a tight low end, neutral low mids, a clear, open upper-mid definition and well-controlled high treble, meaning you can shift from shimmering tubular-bell-like cleans to “flute-like” high gain with simply a tweak of the drive knob.
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 250W RMS |
| Nominal impedance | 16 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 70-5500 Hz |
| Resonance frequency | 55 Hz |
| Voice coil diameter | 2.5", 63 mm |
| Magnet type | Neodymium |
| Magnet weight | N A |
| Unit weight | 5.5 lb, 2.6 Kg |
UK Manufacture
More Info
Weighing only 2.6 Kg and offering a tight low end with clean neutral mids and a smooth upper register
Out of Stock
R7,050.00
Celestion Neo 250 Copperback guitar speaker, 8 Ohm (Neo 250 Copperback 8 Ohm)
Sacrificing none of the delicious musicality of your favourite Celestions, the Neo 250 Copperback is a neodymium speaker that supplies tons of tone without the signature cone break-up immediately associated with the classic Celestion growl. Perfect for high volume clean tones in Jazz, Country, Blues and early Rock and Roll.
The ideal replacement for the Electrovoice EVM12L.
It's definitely not the “brown sound”, but for those wanting more transparency and less midrange vocal intensity the Neo 250 reveals the best from your amplifier and playing without additional colouration. The speaker's unique response has a tight low end, neutral low mids, a clear, open upper-mid definition and well-controlled high treble, meaning you can shift from shimmering tubular-bell-like cleans to “flute-like” high gain with simply a tweak of the drive knob.
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 250W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 70-5500 Hz |
| Resonance frequency | 55 Hz |
| Voice coil diameter | 2.5", 63 mm |
| Magnet type | Neodymium |
| Magnet weight | N A |
| Unit weight | 5.5 lb, 2.6 Kg |
UK Manufacture
More Info
Weighing only 2.6 Kg and offering a tight low end with clean neutral mids and a smooth upper register