Celestion
10" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R7,650.00
12" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R9,300.00
15" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R13,550.00
Warm, expressive, detailed and well balanced with 10" punch and dynamics
Out of Stock
R4,150.00
Full bodied vintage tone with complex mids, a smooth top end and classic cone breakup
Out of Stock
R3,850.00
Full bodied vintage tone with complex mids, a smooth top end and classic cone breakup
The fast response of a 10" with the creamy vocal tone and output of a 12
Out of Stock
R3,200.00
The Heritage G12 M Greenback tone with Eddie van Halen black rear can and logo
Out of Stock
R6,000.00
The Heritage G12 M Greenback tone with Eddie van Halen black rear can and logo
Out of Stock
R6,000.00
Cuts through loud stage levels for chord work and gives a hard edge to single notes
Out of Stock
R5,500.00
Cuts through loud stage levels for chord work and gives a hard edge to single notes
Out of Stock
R5,500.00
Celestion FTX1025 Co-axial full range (FTX1025)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1025 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1025 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 10 inch, 254 mm | |
| Power rating | 600W continuous | 80W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 96dB 1W 1M | 104dB 1W 1M |
| Frequency Range | 60-5,000 Hz | 1,000-20,000 Hz |
| Resonance Frequency | 71.5 Hz | |
| Xmax | 3 mm | |
| Qts | 0.44 | |
| Minimum crossover point | 2,000 Hz | |
| Voice Coil Diameter | 2.5", 64 mm | 1.4", 34 mm |
| Voice Coil Construction | Edgewound Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass Fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 1.5 Kg | |
| Weight | 4.5 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED10" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R7,650.00
Celestion FTX1225 Co-axial full range (FTX1225)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1225 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system. This ensures accurate time alignment across the frequency range whilst maintaining excellent off axis response and compact cabinet design.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1225 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 12 inch, 305 mm | |
| Power rating | 600W continuous | 120W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 97dB 1W 1M | 104dB 1W 1M |
| Frequency Range | 50-4,000 Hz | 1,000-18,000 Hz |
| Resonance Frequency | 42 Hz | |
| Xmax | 4 mm | |
| Qts | 0.403 | |
| Minimum crossover point | 2,000 Hz | |
| Voice Coil Diameter | 2.5", 64 mm | 1.75", 44 mm |
| Voice Coil Construction | Edgewound Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass Fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 2.3 Kg | |
| Weight | 5.9 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED12" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R9,300.00
Celestion FTX1530 Co-axial full range (FTX1530)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1525 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound voice coils, sound castle diaphragm clamping and a demodulation ring the FTX1525 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 15 inch, 381 mm | 150W continuous |
| Power rating | 800W continuous | 150W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 97dB 1W 1M | 106.5dB 1W 1M |
| Frequency Range | 40-4,000 Hz | 800-18,000 Hz |
| Resonance Frequency | 42.5 Hz | |
| Xmax | 4 mm | |
| Qts | 0.28 | |
| Minimum crossover point | 1,000 Hz | |
| Voice Coil Diameter | 3", 75 mm | 3", 75 mm |
| Voice Coil Construction | Edgewound Copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass Fibre | |
| Cone/Diaphragm | Kevlar loaded paper | Titanium + Polyimide surround |
| Magnet | Ferrite, 2.3 Kg | |
| Weight | 6.5 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED15" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R13,550.00
Celestion G10 Creamback guitar speaker, 16 Ohm (G10 Creamback 16 Ohm)
The new G10 Creamback packs everything guitar players love about Creamback speakers into a 10" format. Hand-built in the UK using the same production methods and materials developed for the 12-inch models, the G10 Creamback uses a ceramic magnet and a 1.75-inch voice coil to deliver 45-watt power handling. With all the punch and dynamics typical of a 10, its overall tone is warm, expressive, detailed and well-balanced.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 45W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 95-5,500 Hz |
| Resonance frequency | 98 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 14 Oz, 0.397 Kg |
| Unit Weight | 3.5 lb, 1.6 Kg |
More Info
Warm, expressive, detailed and well balanced with 10" punch and dynamics
Out of Stock
R4,150.00
Celestion G10 Creamback guitar speaker, 8 Ohm (G10 Creamback 8 Ohm)
The new G10 Creamback packs everything guitar players love about Creamback speakers into a 10" format. Hand-built in the UK using the same production methods and materials developed for the 12-inch models, the G10 Creamback uses a ceramic magnet and a 1.75-inch voice coil to deliver 45-watt power handling. With all the punch and dynamics typical of a 10, its overall tone is warm, expressive, detailed and well-balanced.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 45W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 95-5,500 Hz |
| Resonance frequency | 98 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 14 Oz, 0.397 Kg |
| Unit Weight | 3.5 lb, 1.6 Kg |
More Info
Warm, expressive, detailed and well balanced with 10" punch and dynamics
Celestion G10 Gold guitar speaker, 16 Ohm (G10 Gold 16 Ohm)
Following the great reviews received for the Gold 12", Celestion realised there was also a need for a speaker that conveyed the Alnico mellowness of the original Blue, with the speed and response of a 10" driver. The G10 Gold is the ultimate 10" guitar speaker, blending unmistakable Alnico class with a rich low-end, creamy mid-range and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets. Particularly good in Classic Fenders.
Rocked by Joe Perry of Aerosmith
General Specifications
UK Manufacture
Rocked by Joe Perry of Aerosmith
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 40W RMS |
| Nominal Impedance | 15 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency range | 80-6,000 Hz |
| Resonance frequency | 75 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Alnico |
| Magnet Weight | N A |
| Unit Weight | 6 lb, 2.7 Kg |
More Info
10" speed plus a rich low end with creamy mids and a chiming top end
Out of Stock
R8,150.00
Celestion G10 Gold guitar speaker, 8 Ohm (G10 Gold 8 Ohm)
Following the great reviews received for the Gold 12", Celestion realised there was also a need for a speaker that conveyed the Alnico mellowness of the original Blue, with the speed and response of a 10" driver. The G10 Gold is the ultimate 10" guitar speaker, blending unmistakable Alnico class with a rich low-end, creamy mid-range and vintage chiming top-end. Springy, warm, revealing and highly expressive, it can be used singly or in pairs to add a classy sheen to any amp, or in a 4x10 configuration for higher volume depth, warmth and shimmer, with less of the boom associated with 4x12 cabinets. Particularly good in classic Fenders.
Rocked by Joe Perry of Aerosmith
General Specifications
UK Manufacture
Rocked by Joe Perry of Aerosmith
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 40W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency range | 80-6,000 Hz |
| Resonance frequency | 75 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Alnico |
| Magnet Weight | N A |
| Unit Weight | 6 lb, 2.7 Kg |
More Info
10" speed plus a rich low end with creamy mids and a chiming top end
Out of Stock
R8,150.00
Celestion G10 Greenback guitar speaker, 16 Ohm (G10 Greenback 16 Ohm)
The 10" that thinks it's a 12". This guitar speaker was developed to recapture the legendary sound of Celestion's 1970s 10s - a 10" speaker with a surprisingly meaty tone. Low in output but with the weighty low-end balance of a 12", the G10 Greenback features a complex, creamy mid-range and smooth, vintage top-end. In small combos this speaker adds real class, and when combined in a 4x10 gives rise to a raunchy, full-bodied tone, rich in low-end thump.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 30W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency range | 95-5,500 Hz |
| Resonance frequency | 98 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 14 Oz, 0.397 Kg |
| Unit Weight | 3.5 lb, 1.6 Kg |
More Info
Full bodied vintage tone with complex mids, a smooth top end and classic cone breakup
Out of Stock
R3,850.00
Celestion G10 Greenback guitar speaker, 8 Ohm (G10 Greenback 8 Ohm)
The 10" that thinks it's a 12". This guitar speaker was developed to recapture the legendary sound of Celestion's 1970s 10s - a 10" speaker with a surprisingly meaty tone. Low in output but with the weighty low-end balance of a 12", the G10 Greenback features a complex, creamy mid-range and smooth, vintage top-end. In small combos this speaker adds real class, and when combined in a 4x10 gives rise to a raunchy, full-bodied tone, rich in low-end thump.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 30W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency range | 95-5,500 Hz |
| Resonance frequency | 98 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 14 Oz, 0.397 Kg |
| Unit Weight | 3.5 lb, 1.6 Kg |
More Info
Full bodied vintage tone with complex mids, a smooth top end and classic cone breakup
Celestion G10 Vintage guitar speaker, 16 Ohm (G10 Vintage 16 Ohm)
With a powerful magnet and the same voice coil design as the Vintage 30 the G10 Vintage packs an impressive punch. With the fast response of a 10" and the creamy vocal tones of a 12 it is the ideal choice to add depth and weight to 10" combos and cabs.
Used by Jim Campilongo with a Fender Telecaster
General Specifications
Used by Jim Campilongo with a Fender Telecaster
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 60W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency range | 100-5,500 Hz |
| Resonance frequency | 115 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 31 Oz, 0.88 Kg |
| Unit Weight | 5.3 lb, 2.4 Kg |
More Info
The fast response of a 10" with the creamy vocal tone and output of a 12
Out of Stock
R3,200.00
Celestion G10 Vintage guitar speaker, 8 Ohm (G10 Vintage 8 Ohm)
With a powerful magnet and the same voice coil design as the Vintage 30 the G10 Vintage packs an impressive punch. With the fast response of a 10" and the creamy vocal tones of a 12 it is the ideal choice to add depth and weight to 10" combos and cabs.
Used by Jim Campilongo with a Fender Telecaster
General Specifications
Used by Jim Campilongo with a Fender Telecaster
General Specifications
| Nominal diameter | 10 inch, 254 mm |
| Power rating | 60W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency range | 100-5,500 Hz |
| Resonance frequency | 115 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet Type | Ceramic |
| Magnet Weight | 31 Oz, 0.88 Kg |
| Unit Weight | 5.3 lb, 2.4 Kg |
More Info
The fast response of a 10" with the creamy vocal tone and output of a 12
Celestion G12 EVH guitar speaker, 15 Ohm (G12 EVH 15 Ohm)
Eddie van Halen has been a huge fan of the original 20W Celestion Greenback throughout his career. When Celestion released the Heritage series, a faithful re-creation of the original medium magnet Greenback, Eddie found his signature model. Handcrafted in England to provide classic tone, the G12 EVH is the Eddie van Halen signature version of the Heritage G12M. It is characterised by a warm controlled low-end, a rich and vocal mid-range and a delicate, detailed top-end. Fitted with a black rear can with the unmistakable EVH logo and colours this speaker has unmistakable looks and tone to match.
General Specification
UK Manufacture
General Specification
| Nominal diameter | 12 inch, 305 mm |
| Power rating | 20 Watt RMS |
| Nominal Impedance | 16 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 75-5,000 Hz |
| Resonance frequency | 75 Hz |
| Voice Coil Diameter | 1.75 inch, 44.5 mm |
| Magnet Type | Ceramic |
| Magnet weight | 35 Oz, 0.99 Kg |
| Unit Weight | 7.9 lb, 3.6 Kg |
UK Manufacture
More Info
The Heritage G12 M Greenback tone with Eddie van Halen black rear can and logo
Out of Stock
R6,000.00
Celestion G12 EVH guitar speaker, 8 Ohm (G12 EVH 8 Ohm)
Eddie van Halen has been a huge fan of the original 20W Celestion Greenback throughout his career. When Celestion released the Heritage series, a faithful re-creation of the original medium magnet Greenback, Eddie found his signature model. Handcrafted in England to provide classic tone, the G12 EVH is the Eddie van Halen signature version of the Heritage G12M. It is characterised by a warm controlled low-end, a rich and vocal mid-range and a delicate, detailed top-end. Fitted with a black rear can with the unmistakable EVH logo and colours this speaker has unmistakable looks and tone to match.
General Specification
UK Manufacture
General Specification
| Nominal diameter | 12 inch, 305 mm |
| Power rating | 20 Watt RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency range | 75-5,000 Hz |
| Resonance frequency | 75 Hz |
| Voice Coil Diameter | 1.75 inch, 44.5 mm |
| Magnet Type | Ceramic |
| Magnet weight | 35 Oz, 0.99 Kg |
| Unit Weight | 7.9 lb, 3.6 Kg |
More Info
The Heritage G12 M Greenback tone with Eddie van Halen black rear can and logo
Out of Stock
R6,000.00
Celestion G12H Anniversary guitar speaker, 16 Ohm (G12H Anniversary 16 Ohm)
Essentially the heavy magnet version of the Greenback the G12H Anniversary was re-released over a decade ago and remains popular with those looking to recreate the classic sounds of Sixties and Seventies rock. Tonally it offers a strong and aggressive low end with a powerful lower mid range, attacking mids and an ice cool top end all guaranteed to penetrate any mix. A favorite of boutique amp manufacturers the G12 H is often seen singly or in combination with the Celestion Blue or Gold to add ceramic "attitude" to the classic Alnico chime.
General Specifications
UK Manufacture
General Specifications
| Nominal diameter | 12", 305mm |
| Power rating | 30W RMS |
| Nominal impedance | 16 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 75-5000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Cuts through loud stage levels for chord work and gives a hard edge to single notes
Out of Stock
R5,500.00
Celestion G12H Anniversary guitar speaker, 8 Ohm (G12H Anniversary 8 Ohm)
Essentially the heavy magnet version of the Greenback the G12H Anniversary was re-released over a decade ago and remains popular with those looking to recreate the classic sounds of Sixties and Seventies rock. Tonally it offers a strong and aggressive low end with a powerful lower mid range, attacking mids and an ice cool top end all guaranteed to penetrate any mix. A favorite of boutique amp manufacturers the G12 H is often seen singly or in combination with the Celestion Blue or Gold to add ceramic "attitude" to the classic Alnico chime.
General Specification
UK Manufacture
General Specification
| Nominal diameter | 12", 305mm |
| Power rating | 30W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 75-5000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Cuts through loud stage levels for chord work and gives a hard edge to single notes
Out of Stock
R5,500.00
Celestion G12H-150 Redback guitar speaker, 16 Ohm (G12H-150 Redback, 16 Ohm)
The G12H-150 Redback has been created for players who are looking for extreme power handling but refuse to compromise on great tone. Rated at a gargantuan 150-watts, the Redback is constructed with a supersized 2-inch voice coil and features the heaviest G12 magnet. The result is a guitar speaker that sounds 100% Celestion in character, yet is primed to withstand a pummelling from a 100-watt head all by itself, and still come back for more.The Redback proves that you no longer need to choose between power and tone. With a tight, well-controlled low end, detailed midrange and more relaxed treble, Celestion’s engineering expertise has produced a truly high power guitar speaker that can still deliver balance, responsiveness and superb playability with muscular ease. With lower power combos, expect tons of smooth, clean tone and don’t be afraid to plug in your favourite stomp box. Thinking of downsizing your cabinet? Simply hook up a single Redback to your 100-watt head and generate giant slabs of frightening, monstrous tone.
General Specifications
UK ManufactureMore Info
General Specifications
| Nominal diameter | 12", 305 mm |
| Power rating | 150W RMS |
| Nominal Impedance | 16 Ohms |
| Sensitivity | 100 dB 1W 1M |
| Frequency range | 70-5000 Hz |
| Resonance frequency | 75 Hz |
| Voice coil diameter | 2", 50 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Redback review
The best of Celestion tone and playability plus HUGE power handling
Out of Stock
R5,825.00