Celestion
Huge magnet and motor assembly provides 3,2KW power handling and high sensitivity
Out of Stock
R18,000.00
Strong mid bass punch with aggressive mids and controlled tops to cut through the mix
Out of Stock
R5,225.00
Strong mid bass punch with aggressive mids and controlled tops to cut through the mix
Out of Stock
R5,225.00
The guitarist's full range speaker for IRs and amp/cab modellers on stage or in studio
Out of Stock
R6,450.00
Extended range dual wizzer cone speaker for IRs and amp/cab modellers on stage or in studio
Out of Stock
R4,775.00
400 Watt cast chassis speaker suited to compact 2 way and line array systems
Out of Stock
R3,125.00
The classic premium grade 2 way 12 inch speaker, 700 Watts, 96dB, 40-4,000Hz
Out of Stock
R5,550.00
High sensitivity speaker ideal for use with a large compression driver and 18" sub
Out of Stock
R7,150.00
Dual suspension speaker with deep powerful bass response in large enclosures
Out of Stock
R11,500.00
6.5" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R4,850.00
8" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R5,675.00
Celestion CF1840JD 18" 8 Ohm Sub Bass (CF1840JD 8 Ohm)
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1840JD is typical of the series and offers the following featuresA lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,200W AES, 2,400W continuous. 4,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 37 Hz |
| Xmax | 12.5 mm |
| Qts | 0.397 |
| Vas | 155 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 112 Oz, 3.18 Kg |
| Total Weight | 25.5 lb, 11.6 Kg |
| Suggested enclosure | 150-180l ported at 40 Hz |
More Info
2,400 W speaker with response down to 35Hz in a large ported enclosure
Out of Stock
R11,000.00
Celestion CF18VJD 18" Sub Bass (CF18VJD)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF18VJD offers high efficiency with huge extended, tight and powerful bass response and massive power handling. It offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 5" dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
The CF18VJD offers high efficiency with huge extended, tight and powerful bass response and massive power handling. It offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Double suspension systems with "flexiroll" surrounds ensure maximum control of the cone over large excursions.
A 5" dual layer, inside/outside voice coil with glass fibre former provides massive power handling and efficient cooling.
General Specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,600W AES, 3,200W continuous. 6,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency Range | 25-1,500 Hz |
| Resonance Frequency | 34.5 Hz |
| Xmax | 12 mm |
| Qts | 0,309 |
| Vas | 145.8 l |
| Voice Coil Diameter | 5", 125 mm |
| Voice Coil Construction | Dual layer in/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Carbon and Kevlar loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 174 Oz, 4.93 Kg |
| Total Weight | 50.6 lb, 23 Kg |
| Suggested enclosure | Horn loaded or 80-100l ported at 40Hz. |
More Info
Huge magnet and motor assembly provides 3,2KW power handling and high sensitivity
Out of Stock
R18,000.00
Celestion Classic Lead 80 guitar speaker, 16 Ohm (Classic Lead 80, 16 Ohm)
Developed in the Seventies to provide more power and attack specifically for lead guitarists the Classic Lead features a fibreglass voice coil which provides a unique tone and character. The tightly controlled low end with a powerful upper bass and low mid, aggressive mids and a strong yet controlled top end ensure that individual notes cut through the mix whilst still providing excellent results on power chords. High power handling and efficiency allow this speaker to perform superbly in single speaker combos, not for everyone but for those who swear by the Classic Lead there is just no other choice.
General Specifications
UK Manufacture
More Info
General Specifications
| Nominal diameter | 12", 305mm |
| Power rating | 80W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency range | 80-5000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Classic Lead sound demo
Strong mid bass punch with aggressive mids and controlled tops to cut through the mix
Out of Stock
R5,225.00
Celestion Classic Lead 80 guitar speaker, 8 Ohm (Classic Lead 80, 8 Ohm)
Developed in the Seventies to provide more power and attack specifically for lead guitarists the Classic Lead features a fibreglass voice coil which provides a unique tone and character. The tightly controlled low end with a powerful upper bass and low mid, aggressive mids and a strong yet controlled top end ensure that individual notes cut through the mix whilst still providing excellent results on power chords. High power handling and efficiency allow this speaker to perform superbly in single speaker combos, not for everyone but for those who swear by the Classic Lead there is just no other choice.
General Specifications
UK Manufacture
More Info
General Specifications
| Nominal diameter | 12", 305mm |
| Power rating | 80W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency range | 80-5000 Hz |
| Resonance frequency | 85 Hz |
| Voice coil diameter | 1.75", 44.5 mm |
| Magnet type | Ceramic |
| Magnet weight | 50 Oz, 1.42 Kg |
| Unit weight | 10.4 lb, 4.7 Kg |
More Info
Classic Lead sound demo
Strong mid bass punch with aggressive mids and controlled tops to cut through the mix
Out of Stock
R5,225.00
Celestion Eight 15 guitar speaker, 16 Ohm (Eight 15 16 Ohm)
With well balanced mids and highs and a surprisingly meaty bottom end the Eight 15 is ideal for upgrading your bedroom blaster with authentic British tone.
Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8 inch around.
General Specifications
Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8 inch around.
General Specifications
| Nominal diameter | 8", 203 mm |
| Power rating | 15W RMS |
| Nominal impedance | 16 Ohms |
| Sensitivity | 95dB 1W 1M |
| Frequency range | 100-5000 Hz |
| Resonance frequency | 120 Hz |
| Voice coil diameter | 1", 25 mm |
| Magnet type | Ceramic |
| Magnet weight | 13 Oz, 0.37 Kg |
| Unit weight | 2.2 lb, 1 Kg |
More Info
Blast new life into your bedroom blaster combo with Celestion tone
Out of Stock
R1,400.00
Celestion Eight 15 guitar speaker, 4 Ohm (Eight 15 4 Ohm)
With well balanced mids and highs and a surprisingly meaty bottom end the Eight 15 is ideal for upgrading your bedroom blaster with authentic British tone.
Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8 inch around.
General Specifications
Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8 inch around.
General Specifications
| Nominal diameter | 8", 203 mm |
| Power rating | 15W RMS |
| Nominal impedance | 4 Ohms |
| Sensitivity | 95dB 1W 1M |
| Frequency range | 100-5000 Hz |
| Resonance frequency | 120 Hz |
| Voice coil diameter | 1", 25 mm |
| Magnet type | Ceramic |
| Magnet weight | 13 Oz, 0.37 Kg |
| Unit weight | 2.2 lb, 1 Kg |
More Info
Blast new life into your bedroom blaster combo with Celestion tone
Out of Stock
R1,400.00
Celestion Eight 15 guitar speaker, 8 Ohm (Eight 15 8 Ohm)
With well balanced mids and highs and a surprisingly meaty bottom end the Eight 15 is ideal for upgrading your bedroom blaster with authentic British tone.
Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8 inch around.
General Specifications
Supersize the performance of your amp with the sonic might of the Eight 15, the fattest sounding 8 inch around.
General Specifications
| Nominal diameter | 8", 203 mm |
| Power rating | 15W RMS |
| Nominal impedance | 8 Ohms |
| Sensitivity | 95dB 1W 1M |
| Frequency range | 100-5000 Hz |
| Resonance frequency | 120 Hz |
| Voice coil diameter | 1", 25 mm |
| Magnet type | Ceramic |
| Magnet weight | 13 Oz, 0.37 Kg |
| Unit weight | 2.2 lb, 1 Kg |
More Info
Blast new life into your bedroom blaster combo with Celestion tone
Celestion F12-X200 guitar speaker, 8 Ohm (F12-X200 8 Ohm)
Finally, a dedicated guitar speaker for amp modellers and IRs. The F12-X200 is a truly full range driver that delivers a frequency response from 60Hz all the way up to 20kHz, the higher frequency part of the signal is reproduced using a Celestion compression driver which has been integrated using a high quality crossover circuit. This enables the F12-X200 to reproduce the full spectrum of audible frequencies, for the most accurate output possible, whatever your environment and set-up.
The F12-X200's response is remarkably neutral, with Celestion technology built in to ensure there are no unwanted colourations that can overpower the input signal. However, the lighter moving mass and straighter sided cone of the type commonly used with guitar speakers gives the X200 the feel and live response of a traditional guitar speaker, delivering all the physical feedback you'd expect from playing through a conventional guitar rig.
Used with amp modellers or IRs, in a backline cab or a wedge monitor, on stage or in the studio, it doesn't just sound like great guitar tone, it feels like it too.
General Specifications
General Specifications
| Nominal diameter | 12 inch, 305 mm |
| Power rating | 200W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency range | 60-2000Hz |
| Resonance frequency | 75 Hz |
| Voice coil diameter | 2", 50 mm |
| Magnet Type | Ceramic |
| Unit Weight | 9.1 lb, 4.1 kg |
More Info
The guitarist's full range speaker for IRs and amp/cab modellers on stage or in studio
Out of Stock
R6,450.00
Celestion F12M-150 guitar speaker, 8 Ohm (F12M-150 8 Ohm)
General Specifications
The F12M-150 is a full range, LIVE response speaker, purpose designed for use with amp modellers and IRs. Its unique design features two additional tweeter cones integrated into the main woofer cone (making it “Triple Cone”). This enables the speaker to deliver near full-range frequency performance: from 60Hz up to 12kHz, for a rich and detailed sound, whatever your set-up.
Designed with Celestion’s Pro Audio know-how, response is flat and neutral, ensuring no unwanted colourations that could overwhelm the input signal. But with an optimised woofer cone and lighter moving mass the F12M-150 is designed to closely mimic the responsiveness of a traditional guitar speaker, delivering all the tactile feel you would expect from playing through a conventional guitar rig.
General Specifications
| Nominal diameter | 12 inch, 305 mm |
| Power rating | 150W RMS |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 97 dB 1W 1M |
| Frequency range | 60-12,000Hz |
| Resonance frequency | 69 Hz |
| Voice coil diameter | 2", 50 mm |
| Magnet Type | Ceramic |
| Unit Weight | 7.9 lb, 3.6 kg |
More Info
Extended range dual wizzer cone speaker for IRs and amp/cab modellers on stage or in studio
Out of Stock
R4,775.00
Celestion FTR08-2011D 8" bass/mid (FTR08-2011D)
The Celestion FTR08-2011D is an 8 inch high quality bass/mid driver ideally suited to premium two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A kevlar loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
A high temperature voice coil with Polyimide former for increased (350W EIA) power handling.
General specifications
| Nominal Diameter | 8 inch, 200- mm |
| Power rating | 200W AES, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 70-6,000 Hz |
| Resonance Frequency | 86.1 Hz |
| Xmax | 5.5 mm |
| Qts | 0.436 |
| Vas | 8.99 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Round copper |
| Former Material | Polyimide |
| Cone Material | Weather treated Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 8 lb, 3.65 Kg |
More Info
400 Watt cast chassis speaker suited to compact 2 way and line array systems
Out of Stock
R3,125.00
Celestion FTR12-3070C 12" bass/mid (FTR12-3070C)
The Celestion FTR12-3070C is a 12 inch high quality bass/mid driver ideally suited to two way system designs and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with a sealed "M roll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (500W EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 350W AES, 700W continuous, 1,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 65.1 Hz |
| Xmax | 5.5 mm |
| Qts | 0.321 |
| Vas | 43.7 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Weather treated glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.9 lb, 6.3 Kg |
| Suggested enclosure | 40-50l ported at 70 Hz |
More Info
The classic premium grade 2 way 12 inch speaker, 700 Watts, 96dB, 40-4,000Hz
Out of Stock
R5,550.00
Celestion FTR12-4080DL 12" 8 Ohm Sub Bass (FTR12-4080DL 8 Ohm)
The Celestion FTR12-4080DL is a 12 inch high quality sub bass woofer ideally suited to compact ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with elastomer surround for maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
A high temperature round copper voice coil with aluminium former for increased (1KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with elastomer surround for maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
A high temperature round copper voice coil with aluminium former for increased (1KW EIA) power handling.
General specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 700W AES, 1,400W continuous. 2,800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 88 dB 1W 1M |
| Frequency Range | 20-300 Hz |
| Resonance Frequency | 28.9 Hz |
| Xmax | 13.6 mm |
| Qts | 0.303 |
| VAS | 68.6 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Round copper |
| Former Material | Aluminium |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 126 Oz, 3.6 Kg |
| Total Weight | 22.4 lb, 10.2 Kg |
| Suggested enclosure | 50-70l ported at 30 Hz |
More Info
12 inch long excursion dual suspension sub with extension down to 25Hz
Out of Stock
R9,500.00
Celestion FTR15-3070C 15" Bass/mid (FTR15-3070C)
The Celestion FTR15-3070C is a 15 inch high quality, high efficiency bass driver ideally suited to three way systems or particularly to two way large format compression driver designs. It features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with "Flexiroll" surround for reduced distortion at maximum excursion.
An inside/outside wound voice coil with glass fibre former for increased (550W EIA) power handling.
General specifications
| Nominal Diameter | 15 inch, 381 mm |
| Power rating | 400W AES, 800W continuous, 1,600W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 40-4,000 Hz |
| Resonance Frequency | 41.4 Hz |
| Xmax | 5.5 mm |
| Qts | 0.382 |
| Vas | 187.62 l |
| Voice Coil Diameter | 3", 75 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 81 Oz, 2.3 Kg |
| Total Weight | 13.8 lb, 6.3 Kg |
More Info
High sensitivity speaker ideal for use with a large compression driver and 18" sub
Out of Stock
R7,150.00
Celestion FTR18-4080HDX 18" Sub Bass (FTR18-4080HDX)
The Celestion FTR18-4080HDX is an 18 inch high quality sub bass woofer ideally suited to large ported enclosures. It offers extremely low frequency performance with high power handling and features the following design highlights:
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
A cast aluminium chassis designed to minimise reflections back onto the cone.
Intelligent heat management with balanced airflow venting
A glass fibre loaded weather resistant cone with multiroll surround for reduced distortion at maximum excursion.
Dual suspension to provide optimum cone control at excursion extremes.
An inside/outside wound voice coil with fibreglass former for increased (1.5KW EIA) power handling.
General specifications
| Nominal Diameter | 18 inch, 460 mm |
| Power rating | 1,000W AES, 2,000W continuous. 4,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 95 dB 1W 1M |
| Frequency Range | 30-2,500 Hz |
| Resonance Frequency | 39.2 Hz |
| Xmax | 10.1 mm |
| Qts | 0.429 |
| Vas | 174.88 l |
| Voice Coil Diameter | 4", 100 mm |
| Voice Coil Construction | Inside/outside wound round copper |
| Former Material | Glass fibre |
| Cone Material | Glass fibre loaded paper |
| Chassis Type | Cast Aluminium |
| Magnet | Ferrite, 110 Oz, 3.1 Kg |
| Total Weight | 21.6 lb, 9.8 Kg |
| Suggested enclosure | 200l ported at 45Hz |
More Info
Dual suspension speaker with deep powerful bass response in large enclosures
Out of Stock
R11,500.00
Celestion FTX0617 Co-axial full range (FTX0617)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0617 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0617 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 6.5 inch, 165 mm | |
| Power rating | 300W continuous | 80W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 92dB 1W 1M | 103dB 1W 1M |
| Frequency Range | 100-6,000 Hz | 1,500-20,000 Hz |
| Resonance Frequency | 100 Hz | |
| Xmax | 2 mm | |
| Qts | 0.738 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 1.75", 44 mm | 1.4", 34 mm |
| Voice Coil Construction | Edgewound copper clad Aluminium | Copper clad Aluminium |
| Former Material | Glass fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 0.88Kg | |
| Weight | 3 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED6.5" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R4,850.00
Celestion FTX0820 Co-axial full range (FTX0820)
Celestion's FTX series common motor co-axials offer significant advantages over conventional 2 way designs as well as over other co-axial drivers whilst retaining the improved off axis response expected in a co-axial system.
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0820 offers the best of Celestion design and manufacture.
General Specifications
Some co-axial systems mount a separate HF unit in front of the LF cone which causes "shading' of midrange output as well as reflections back onto the cone. Other designs place a compression driver behind the main magnet assembly and use the LF cone as a conical horn thereby eliminating the shading and reflection problems of the simple co-ax system. Celestion have taken this one step further by utilising the main LF magnet to drive the compression driver diaphragm as well as the LF system which ensures accurate time alignment across the frequency range.
With features such as a cast chassis, edgewound LF voice coil, a demodulation ring and 100 degree coverage the FTX0820 offers the best of Celestion design and manufacture.
General Specifications
| LF | HF | |
| Nominal Diameter | 8 inch, 200 mm | |
| Power rating | 400W continuous | 80W continuous |
| Nominal impedance | 8 Ohms | 8 Ohms |
| Sensitivity | 94dB 1W 1M | 103dB 1W 1M |
| Frequency Range | 70-5,000 Hz | 1,500-20,000 Hz |
| Resonance Frequency | 78.8 Hz | |
| Xmax | 2 mm | |
| Qts | 0.279 | |
| Minimum crossover point | 2,200 Hz | |
| Voice Coil Diameter | 2", 50 mm | 1.4", 34 mm |
| Voice Coil Construction | Edgewound copper | Copper clad Aluminium |
| Former Material | Glass fibre | |
| Cone/Diaphragm | Kevlar loaded paper | One piece Polyimide |
| Magnet | Ferrite, 1.5 Kg | |
| Weight | 4.1 Kg |
More Info
NB SEPARATE CROSSOVER REQUIRED8" cast aluminium chassis full range speaker with common motor co-axial HF
Out of Stock
R5,675.00