Celestion
1" throat bolt on Neodymium driver with 44 mm voice coil and deep drawn Titanium diaphragm
Out of Stock
R5,650.00
1" throat bolt on 16 Ohm driver with 44 mm voice coil and one piece PETP diaphragm and surround
Out of Stock
R2,975.00
1" throat bolt on driver with 44 mm voice coil and one piece PETP diaphragm and surround
1" throat screw on driver with 44 mm voice coil and one piece PETP diaphragm and surround
Out of Stock
R2,975.00
1" throat bolt on driver with 44 mm voice coil and one piece Polyimide diaphragm and surround
Out of Stock
R3,250.00
1" throat screw on driver with 44 mm voice coil and one piece Polyimide diaphragm and surround
Out of Stock
R3,250.00
1.4" throat bolt on driver with 75 mm voice coil and one piece Titanium diaphragm
Out of Stock
R5,700.00
1.4" throat bolt on driver with 75 mm voice coil and Titanium diaphragm and surround
Out of Stock
R8,000.00
1.4" throat bolt on driver with 75 mm voice coil and Titanium diaphragm and surround
Out of Stock
R8,000.00
2" throat bolt on driver with 75 mm voice coil and one piece Titanium diaphragm
Out of Stock
R7,000.00
500W 8" provides wide frequency range with half roll surround and large Xmax
Out of Stock
R3,750.00
500W 10" with half roll surround and large Xmax for extended bass response
Out of Stock
R5,675.00
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
Out of Stock
R5,675.00
500W 12" with half roll surround and large Xmax for extended bass response
Out of Stock
R6,850.00
Celestion CDX1-1720 compression driver (CDX1-1720)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1720 is typical of Celestion's expertise in the field, it features a rolled Polyamide surround and Titanium diaphragm with "sound castle" clamping providing reduced distortion and greater reliability. This driver is suggested for use in high end 2 way designs as a replacement unit or in new builds particularly with 15" woofers such as the Celestion FTR and NTR series.
General Specifications
General Specifications
| Type | 1 inch throat bolt on |
| Power rating | 100W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 107 dB 1W 1M |
| Frequency range | 800-20,000 Hz |
| Suggested minimum crossover point | 1,500 Hz |
| Magnet | Neodymium |
| Diaphragm and surround | Deep drawn Titanium with Polyamide surround |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 4 x M6 threaded holes on 76 mm PCD |
| Weight | 1.4 lb, 0.65 Kg |
More Info
1" throat bolt on Neodymium driver with 44 mm voice coil and deep drawn Titanium diaphragm
Out of Stock
R5,650.00
Celestion CDX1-1745 compression driver 16 Ohm (CDX1-1745 16 ohm)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1745 is typical of Celestion's expertise in the field, it features a one piece PETP diaphragm and surround which provides high efficiency, smooth frequency response and good power handling. This driver is suggested for use in high power 3 way systems or in 2 way designs with 12" woofers.
General Specifications
General Specifications
| Type | 1 inch throat bolt on |
| Power rating | 80W continuous |
| Nominal impedance | 16 Ohms |
| Sensitivity | 110 dB 1W 1M |
| Frequency range | 1,200-20,000 Hz |
| Suggested minimum crossover point | 2,200 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece PETP |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 4 x M6 threaded holes on 76 mm PCD |
| Weight | 5.1 lb, 2.3 Kg |
More Info
1" throat bolt on 16 Ohm driver with 44 mm voice coil and one piece PETP diaphragm and surround
Out of Stock
R2,975.00
Celestion CDX1-1745 compression driver 8 Ohm (CDX1-1745 8 Ohm)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1745 is typical of Celestion's expertise in the field, it features a one piece PETP diaphragm and surround with "sound castle" clamping which provides high sensitivity, smooth frequency response and good power handling. This driver is suggested for use in high power 3 way systems or in 2 way designs with 12" woofers.
General Specifications
General Specifications
| Type | 1 inch throat bolt on |
| Power rating | 80W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 110 dB 1W 1M |
| Frequency range | 1,200-20,000 Hz |
| Suggested minimum crossover point | 2,200 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece PETP |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 4 x M6 threaded holes on 76 mm PCD |
| Weight | 5.1 lb, 2.3 Kg |
More Info
1" throat bolt on driver with 44 mm voice coil and one piece PETP diaphragm and surround
Celestion CDX1-1746 compression driver (CDX1-1746)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1746 is typical of Celestion's expertise in the field, it features a one piece PETP diaphragm and surround with "sound castle" clamping which provides high sensitivity, smooth frequency response and good power handling. This driver is suggested for use in high power 3 way systems or in 2 way designs with 12" woofers.
General Specifications
General Specifications
| Type | 1 inch throat screw on |
| Power rating | 80W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 110 dB 1W 1M |
| Frequency range | 1,200-20,000 Hz |
| Suggested minimum crossover point | 2,200 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece PETP |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 35 mm OD thread |
| Weight | 5.1 lb, 2.3 Kg |
More Info
1" throat screw on driver with 44 mm voice coil and one piece PETP diaphragm and surround
Out of Stock
R2,975.00
Celestion CDX1-1747 compression driver (CDX1-1747)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1747 is typical of Celestion's expertise in the field, it features a one piece Polyamide diaphragm and surround with "sound castle" clamping providing high sensitivity, reduced distortion and greater reliability. This driver is suggested for use in high power 15 inch 2 way systems.
General Specifications
General Specifications
| Type | 1 inch throat bolt on |
| Power rating | 120W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 110 dB 1W 1M |
| Frequency range | 1,000-20,000 Hz |
| Suggested minimum crossover point | 2,000 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece Polyamide |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 4 x M6 threaded holes on 76 mm PCD |
| Weight | 5.1 lb, 2.3 Kg |
More Info
1" throat bolt on driver with 44 mm voice coil and one piece Polyimide diaphragm and surround
Out of Stock
R3,250.00
Celestion CDX1-1748 compression driver (CDX1-1748)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX1-1748 is typical of Celestion's expertise in the field, it features a one piece Polyamide diaphragm and surround with "sound castle" clamping providing high sensitivity, reduced distortion and greater reliability. This driver is suggested for use in high power 15 inch 2 way systems.
General Specifications
General Specifications
| Type | 1 inch throat screw on |
| Power rating | 120W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 110 dB 1W 1M |
| Frequency range | 1,000-20,000 Hz |
| Suggested minimum crossover point | 2,000 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece Polyimide |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 1.75", 44 mm |
| Horn mounting | 35 mm OD thread |
| Weight | 5.1 lb, 2.3 Kg |
More Info
1" throat screw on driver with 44 mm voice coil and one piece Polyimide diaphragm and surround
Out of Stock
R3,250.00
Celestion CDX14-3035 compression driver (CDX14-3035)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX14-3035 is a large format 1.4" throat driver that is typical of Celestion's expertise in this field, it features a one piece Titanium diaphragm and surround with "sound castle" clamping providing reduced distortion and greater reliability. This driver is suggested for use in high power 2 way designs with single or dual 15" woofers.
General Specifications
General Specifications
| Type | 1.4 inch throat bolt on |
| Power rating | 240W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 108 dB 1W 1M |
| Frequency range | 500-20,000 Hz |
| Suggested minimum crossover point | 800 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece Titanium |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 3", 75 mm |
| Horn mounting | 4 x M6 threaded holes on 102 mm PCD |
| Weight | 11.9 lb, 5.4 Kg |
More Info
1.4" throat bolt on driver with 75 mm voice coil and one piece Titanium diaphragm
Out of Stock
R5,700.00
Celestion CDX14-3045 compression driver 16 Ohm (CDX14-3045)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX14-3045 is a large format 1.4" throat driver that is typical of Celestion's expertise in this field, it features a single piece Titanium diaphragm and surround plus a high temperature polymer clamp ring which providea reduced distortion and greater reliability. This driver is extremely compact and suggested for use in high power line array or point source 2 way designs with single or dual 15" woofers.
General Specifications
General Specifications
| Type | 1.4 inch throat bolt on |
| Power rating | 240W continuous |
| Nominal impedance | 16 Ohms |
| Sensitivity | 108 dB 1W 1M |
| Frequency range | 500-20,000 Hz |
| Suggested minimum crossover point | 800 Hz |
| Magnet | Neodymium |
| Diaphragm and surround | Titanium and Polyimide |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 3", 75 mm |
| Horn mounting | 4 x M6 threaded holes on 102 mm PCD |
| Weight | 4.4 lb, 2 Kg |
1.4" throat bolt on driver with 75 mm voice coil and Titanium diaphragm and surround
Out of Stock
R8,000.00
Celestion CDX14-3045 compression driver 8 Ohm (CDX14-3045)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX14-3045 is a large format 1.4" throat driver that is typical of Celestion's expertise in this field, it features a single piece Titanium diaphragm and surround plus a high temperature polymer clamp ring which providea reduced distortion and greater reliability. This driver is extremely compact and suggested for use in high power line array or point source 2 way designs with single or dual 15" woofers.
General Specifications
General Specifications
| Type | 1.4 inch throat bolt on |
| Power rating | 240W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 108 dB 1W 1M |
| Frequency range | 500-20,000 Hz |
| Suggested minimum crossover point | 800 Hz |
| Magnet | Neodymium |
| Diaphragm and surround | Titanium and Polyimide |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 3", 75 mm |
| Horn mounting | 4 x M6 threaded holes on 102 mm PCD |
| Weight | 4.4 lb, 2 Kg |
1.4" throat bolt on driver with 75 mm voice coil and Titanium diaphragm and surround
Out of Stock
R8,000.00
Celestion CDX20-3020 compression driver (CDX20-3020)
Celestion have built a reputation for some of the best compression drivers available today with more that 1,000 units sold every day. The CDX20-3020 is a large format 2" throat driver that is typical of Celestion's expertise in this field, it features a one piece Titanium diaphragm and surround with "sound castle" clamping providing reduced distortion and greater reliability. This driver is suggested for use in high power 2 way designs with single or dual 15" woofers.
General Specifications
General Specifications
| Type | 2 inch throat bolt on |
| Power rating | 200W continuous |
| Nominal impedance | 8 Ohms |
| Sensitivity | 107 dB 1W 1M |
| Frequency range | 500-18,000 Hz |
| Suggested minimum crossover point | 800 Hz |
| Magnet | Ferrite |
| Diaphragm and surround | One piece Titanium |
| Voice coil type | Edgewound Copper clad Aluminium |
| Voice coil diameter | 3", 75 mm |
| Horn mounting | 4 x M6 threaded holes on 102 mm PCD |
| Weight | 10.8 lb, 4.9 Kg |
More Info
2" throat bolt on driver with 75 mm voice coil and one piece Titanium diaphragm
Out of Stock
R7,000.00
Celestion CF0617M 6.5" Mid range (CF0617M)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF0617M is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Copper sleeved pole piece to minimise induction rise.
An edgewound voice coil with high temperature former provides high power handling and efficient cooling.
Ideal for horn loading
General Specifications
The CF0617M is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Copper sleeved pole piece to minimise induction rise.
An edgewound voice coil with high temperature former provides high power handling and efficient cooling.
Ideal for horn loading
General Specifications
| Nominal Diameter | 6.5 inch, 165 mm |
| Power rating | 200W AES, 400W continuous, 800W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 300-7,000 Hz |
| Resonance Frequency | 129.3 Hz |
| Voice Coil Diameter | 1.75", 45 mm |
| Voice Coil Construction | Edgewound copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper with foam surround |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 0.6 Kg |
| Total Weight | 1.9 Kg |
More Info
High performance mid range optimised for horn loaded applications
Out of Stock
R3,050.00
Celestion CF0820BMB 8" Bass/Mid (CF0820BMB)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF0820BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
The CF0820BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
| Nominal Diameter | 8 inch, 200 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 93 dB 1W 1M |
| Frequency Range | 50-6,000 Hz |
| Resonance Frequency | 50.5 Hz |
| Xmax | 7.25 mm |
| Qts | .366 |
| Vas | 22.42 l |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Treated paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 34.8 Oz, .99 Kg |
| Total Weight | 6.8 lb, 3.1 Kg |
| Suggested enclosure | 15-18l ported at 55 Hz |
More Info
500W 8" provides wide frequency range with half roll surround and large Xmax
Out of Stock
R3,750.00
Celestion CF0820M 8" Mid range (CF0820M)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF0820M is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Copper sleeved pole piece to minimise induction rise.
A copper clad aluminium voice coil with high temperature former provides high power handling and maximises efficiency.
Ideal for use in high power premium 3 way designs.
General Specifications
The CF0820M is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Copper sleeved pole piece to minimise induction rise.
A copper clad aluminium voice coil with high temperature former provides high power handling and maximises efficiency.
Ideal for use in high power premium 3 way designs.
General Specifications
| Nominal Diameter | 8 inch, 200 mm |
| Power rating | 250W AES, 500W continuous, 1,000W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 98 dB 1W 1M |
| Frequency Range | 150-6,000 Hz |
| Resonance Frequency | 202 Hz |
| Voice Coil Diameter | 2", 50 mm |
| Voice Coil Construction | Copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Treated paper with cloth sealed surround |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 1.3 Kg |
| Total Weight | 3.4 Kg |
More Info
Copper sleeved pole open back mid range capable of high SPL output
Out of Stock
R3,750.00
Celestion CF1025BMB 10" Bass/Mid (CF1025BMB)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1025BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large round wound copper voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
The CF1025BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large round wound copper voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
| Nominal Diameter | 10 inch, 250 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 92.5 dB 1W 1M |
| Frequency Range | 45-5,000 Hz |
| Resonance Frequency | 40.9 Hz |
| Xmax | 6.65 mm |
| Qts | 0.355 |
| Bl | 15.28 Tm |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Round Copper |
| Former Material | Polyimide |
| Cone Material | Glass loaded paper paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 50 Oz, 1.42 Kg |
| Total Weight | 9.5 lb, 4.3 Kg |
| Suggested enclosure | 20-25l ported at 50Hz |
More Info
500W 10" with half roll surround and large Xmax for extended bass response
Out of Stock
R5,675.00
Celestion CF1025C 10" Bass/Mid (CF1025C)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
The CF1025C is typical of the series and offers the following features
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Twin demodulation rings to minimise electromagnetic distortion.
An edgewound voice coil with high temperature former provides improved power handling and efficient cooling.
General Specifications
| Nominal Diameter | 10 inch, 254 mm |
| Power rating | 300W AES, 600W continuous, 1,200W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 99 dB 1W 1M |
| Frequency Range | 60-5,000 Hz |
| Resonance Frequency | 54.8 Hz |
| Xmax | 4.25 mm |
| Qts | 0.265 |
| Vas | 38.63 l |
| Voice Coil Diameter | 2.5", 64 mm |
| Voice Coil Construction | Edgewound copper clad aluminium |
| Former Material | Glass fibre |
| Cone Material | Kevlar loaded paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 60 Oz, 1.7 Kg |
| Total Weight | 10.8 lb, 4.9 Kg |
| Suggested enclosure | Horn loaded or 15-20l ported at 70Hz |
More Info
High sensitivity and 600 Watts power handling provide high SPL from a very compact enclosure
Out of Stock
R5,675.00
Celestion CF1230BMB 12" Bass/Mid (CF1230BMB)
Celestion's CF series is their latest, most technologically advanced range of high performance loudspeakers and is to be found in many top speaker brand high end designs.
The CF1230BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
The CF1230BMB is typical of the series and offers the following features
Ideal for use as a high power high sensitivity hi-fi driver or in compact foreground 2 way systems
A lightweight, robust cast chassis designed to minimise reflection back to the cone to reduce acoustic distortion
Balanced airflow venting to maximise voice coil cooling to control thermal compression and increase power handling
FEA optimised magnet topology ensures even distribution of magnet flux in the air gap.
Elastomer half roll surround allows extended cone movement.
A large copper clad aluminium voice coil with high temperature former provides higher efficiency and efficient cooling.
General Specifications
| Nominal Diameter | 12 inch, 305 mm |
| Power rating | 350W AES, 7600W continuous, 1,400W peak |
| Nominal Impedance | 8 Ohms |
| Sensitivity | 96 dB 1W 1M |
| Frequency Range | 50-3,000 Hz |
| Resonance Frequency | 43.4 Hz |
| Xmax | 7 mm |
| Qts | 0.381 |
| Bl | 18.38 Tm |
| Voice Coil Diameter | 3", 75mm |
| Voice Coil Construction | Copper Clad Aluminium |
| Former Material | Glass fibre |
| Cone Material | Glass loaded paper paper |
| Chassis Type | Cast aluminium |
| Magnet | Ferrite, 75 Oz, 2.2 Kg |
| Total Weight | 14.9 lb, 6.75 Kg |
| Suggested enclosure | 45-50l ported at 45Hz |
More Info
500W 12" with half roll surround and large Xmax for extended bass response
Out of Stock
R6,850.00